Narrow Tang Fretwire for Yamaha FG

If you have a string instrument of any kind that needs fixing, a mistake you made in building a new instrument that you need to "disappear," or a question about the ethics of altering an older instrument, ask here. Please note that it will be much easier for us to help you decide on the best repair method if you post some pictures of the problem.

Narrow Tang Fretwire for Yamaha FG

Postby Alain Lambert » Thu Sep 12, 2019 9:38 pm

I have a Yamaha FG 230 on the bench for some repair.
Where coud I find the narrow tang fretwire that was originally used in the 70s.

Dimensions are:

Width of crown: 2 mm / .079"
Height: about 1 mm
Tang width: 0.4 mm / 0.017"
Depth of tang: 2 mm / 0.080 "


I would prefer to not recut the fingerboard if I can avoid it.

Thank you
Alain Lambert
 
Posts: 77
Joined: Sat Jan 07, 2012 7:18 pm
Location: Trois-Rivieres, Quebec

Re: Narrow Tang Fretwire for Yamaha FG

Postby David King » Fri Sep 13, 2019 1:14 pm

Hi Alain,
There aren't too many fret wire mills to choose from. I'd start with Jescar but I don't think I've ever see a tang narrower than .0185" anywhere.
See: https://www.jescarguitar.com/shop/jesca ... ire-37080/
There's a mill in Russia http://sintoms.com/FretsProduction.htm and their 206109 might be as close as you're going to get.
There's a mill in the states that sells through Stew Mac and Dunlop.
There're a couple of mills in Korea, Dongsan Rolling Mill or East Mountain Shape Wire. There are some net rumors that Dunlop has been sourcing their wire here which explains why the quality has fallen so far in the last 10-20 years.
Anyone who has a choice goes with Jescar first.
David King
 
Posts: 2615
Joined: Sat Jan 07, 2012 10:01 pm
Location: Portland, OR

Re: Narrow Tang Fretwire for Yamaha FG

Postby Alain Lambert » Fri Sep 13, 2019 11:13 pm

Thank you David. It look like I will have to recut the fretboard after all.
Jescar is asking way too much for shipment to my place.
Alain Lambert
 
Posts: 77
Joined: Sat Jan 07, 2012 7:18 pm
Location: Trois-Rivieres, Quebec

Re: Narrow Tang Fretwire for Yamaha FG

Postby David King » Sat Sep 14, 2019 11:41 pm

I can't mail a paperclip to Canada without it costing $9.98 so perhaps try https://nextgenguitars.ca/brands/Jescar.html. You might also be able to order from Germany or a UK based supplier. You can also purchase Jescar wire from Luthier's Mercantile http://LMII.com and they may have better shipping rates.
David King
 
Posts: 2615
Joined: Sat Jan 07, 2012 10:01 pm
Location: Portland, OR

Re: Narrow Tang Fretwire for Yamaha FG

Postby Mark Wybierala » Sun Sep 15, 2019 11:22 am

I recall stewmac selling a jig to customize tang width. Maybe it was just for the teeth. I like to cut back the tang and apply black CA to the ends of the slots and have no tang showing. I used tang nippers for a while but they wore out so now I tediously do this with a dremel and a cutoff wheel burning my fingertips. It actually doesn’t take that long to do once you get into the rhythm. The tang is only about 1/16” deeper than the end of the slot and the black CA can almost make the slot invisible against rosewood. It’s very tidy and dressing the fret ends is a lot more straight forward with better looking results. I glue a strip of abs binding to the sides of my slotting saw to achieve a uniform slot depth. Using the black CA on a maple fretboard provided a nice visual effect.
Mark Wybierala
 
Posts: 389
Joined: Fri Feb 03, 2012 10:14 am
Location: Central New Jersey

Re: Narrow Tang Fretwire for Yamaha FG

Postby Barry Daniels » Mon Sep 16, 2019 9:26 pm

I built my own version of Stew-Mac's fret barber. There is no reason you couldn't use that to file the tang as thin as you want. Of course that will remove the barbs but it might still work if you glue the frets in.
MIMF Staff
Barry Daniels
 
Posts: 2337
Joined: Thu Jan 05, 2012 10:58 am
Location: The Woodlands, Texas


Return to String Instrument Repair: Practical and Political Issues

Who is online

Users browsing this forum: No registered users and 2 guests

Your purchase from these sites helps support the MIMForum, but only if you start at the links below!!!
Amazon music     Amazon books     Amazon tools     Rockler tools     Office Depot    

The MIMF is a member-supported forum, please consider supporting us with a donation, thanks!
 • Book store • Tool store • Links •