MIMF

Can anyone suggest a tutorial on routing a headstock for a logo inlay?

I want to use my name as a logo something like this image, but don't really want to use a transfer. I would like to rout the name out and probably fill it with coloured resin, the other smaller text could be transfers. Is this possible or is it too ambitious? Do you perhaps have any other suggestions?



Cheers, Steve

Routing an filling with resin is not easy, and your routing needs to be VERY exact, more so than with an inlay, and usually isn't done because it's quite difficult to make it look good. I suggest just having some transfer decals made and finishing over them. Why use transfers for just a part of your design when the whole thing would look better if it were all transfer?
You could also have some inlays of your signature cut out by CNC machine and then just inlay them yourself, that would be easier than working with a resin.

I tried that once a long time ago. The filler migrated into the grain making the letters a bit fuzzier than I wanted. This is the way that I'm doing it now: http://www.mimf.com/library/Maple_inlay ... -2011.html

I did this as a prototype for the back of a set of custom dominoes but I used black epoxy and it came out great.

Prepare your inlay first, then add it to the headstock overlay prior to gluing it the the neck.

Glue your inlay to the surface with a bit of CA, cut around it to create the opening, flip the overlay over and clamp the inlay (with still-attached overlay shape) into a black epoxy-filled cavity, sand the excess height on the backside smooth when the epoxy is set.

It's quite easy to do quick and perfect inlays this way. If you're making multiple instruments you should be getting your logos already pre-cut from one of the custom work pearl supply houses, so it becomes very cost-effective to do it that way. Here's a shot of a pre-cut inlay going into a banjo peg head overlay.

If you order cnc'd logos, you can also have them cut the pocket in the headstock overlay. I have a stack of 'readymade' veneers with inlaid logos, in the wood types that I use most regularly, and extra logos that I can use for the unusual stuff.

The method that Randy shows above is close to how Gibson did it back in the day, if I understand it correctly.

Thanks for all the suggestions guys. Jury is out as to which way to go at the moment. However I'm liking a number of the ways that you guys have done it and also considering a 'hybrid method' whereby I use Bob Gramann's method to put the lettering into an ebony or walnut inset that I then place into my maple head sort of like this...



or perhaps a plastic insert like this...



Am I being stupid or clever, I don't know?
Any comments appreciated.

Cheers, Steve

The wood inlay looks nice. I wouldn't go to all that work for the plastic insert though.

My opinion? Too much going on, please simplify

I have actually done that and it worked ok for me. It's quite simple to inlay a round or oval section into the maple, but if you were to try and inlay a signature or any other type of inlay that had a complicated shape, you'd get gaps. Gaps need to be filled with a matching filler and in a dark wood this is usually not a problem but in a light wood like maple you can't match the fill color and it sticks out like a sore thumb.

Arnt Rian wrote:My opinion? Too much going on, please simplify

I'm thinking your right!

Cheers, Steve

Mmm - I'm now considering getting a laser etching/cutting machine. Then I could do some really fancy templates for routing as well as use a laser etched logo design straight into the wood. I'm also thinking that a laser could produce some really sexy etchings onto plain wood bodies... Think paisley designs or Fleur-de-lis or some incredible fantasy scenes for those 'prog rock' guitars.