Krylon compatibility with Behlan

TEST ON SCRAP FIRST! If your question is about repair work, either regluing or refinishing, please post it in our Repair Section.

Krylon compatibility with Behlan

Postby John E Giarrizzo » Sat Apr 21, 2018 10:51 am

Refinishing a solid body mini flying V

Initial finish is Krylon Metallic Purple Shimmer. The manufacturer suggests to not cover with a clear finish. It will loose it's "sparkle". It is now a sort of a matt semi-gloss finish. I would like a shiny finish.

I am considering coating with Behlan String Instrument Lacquer Gloss Brilliant B611-1406. The Krylon's solvent is Lacquer thinner, so I suspect that it will be compatible with the Behlan.

I think that I read somewhere on MIMF that someone had done just that with success.

Any thoughts on this?
John E Giarrizzo
Posts: 139
Joined: Sat Feb 04, 2012 10:17 am

Re: Krylon compatibility with Behlan

Postby Todd Stock » Mon Apr 23, 2018 10:07 am

Test on a sample...
Todd Stock
Posts: 394
Joined: Tue Feb 28, 2012 7:57 pm

Re: Krylon compatibility with Behlan

Postby Barry Daniels » Mon Apr 23, 2018 8:09 pm

I would be surprised if you can top Krylon with any clear finish. Just because the paint has lacquer thinner in it does not ensure it is compatible.

But as Todd said test it on scrap. Let it cure well. Then run a cross hatch of knife marks over it with a utility knife and then stick some strong tape on it and yank it off to see if you can cause delamination. If it survives this, it might be OK.
MIMF Staff
Barry Daniels
Posts: 2196
Joined: Thu Jan 05, 2012 10:58 am
Location: The Woodlands, Texas

Return to Glues and Finishes

Who is online

Users browsing this forum: No registered users and 2 guests

Your purchase from these sites helps support the MIMForum, but only if you start at the links below!!!
Amazon music     Amazon books     Amazon tools     Rockler tools     Office Depot    

The MIMF is a member-supported forum, please consider supporting us with a donation, thanks!
 • Book store • Tool store • Links •