Ask your wood and other materials questions here. Please DO NOT post pictures and ask us to identify your wood, we have found that accurate ID is nearly impossible, and such discussions will be deleted. Thanks.
- Posts: 41
- Joined: Wed Jan 09, 2013 5:38 pm
For those that resaw their own wood, what do you do with the odd piece. It seems that whatever thickness I start with (4/4,5/4,8/4, you get the idea) I end up sawing an odd number of pieces. Does anyone have a known use for these? Besides bindings, linings and kindling? I always sem to get an odd number of boards.
- Posts: 940
- Joined: Fri Jan 06, 2012 11:08 am
- Location: Fredericksburg, VA
Every now and then, it's nice to have a spare side.
- Posts: 332
- Joined: Mon May 18, 2015 9:33 pm
- Location: Texas
Ever-body was kung fu fight-in,
Them kids was fast as light-nin.
- Posts: 497
- Joined: Mon Jan 09, 2012 2:02 pm
- Location: Baltimore, Maryland
3 piece backs
A man hears what he wants to hear, and disreguards the rest. Paul Simon
- Posts: 1212
- Joined: Fri Jan 06, 2012 1:05 pm
- Location: St. Louis, MO
Contrasting laminations if you make laminated necks, side purflings if you make a stick to cut bindings off of, headplates and heel caps. Wooden pickguard perhaps?
Take care of your feet and your feet will take care of you.
- Site Admin
- Posts: 1331
- Joined: Fri Dec 23, 2011 6:53 pm
- Location: Atlanta, GA
Hmm, wonder if anyone would bid on a set of 4-5 unmatched back/side pieces...
- Posts: 1381
- Joined: Fri Jan 06, 2012 12:04 pm
Sometimes when resawing I wind up with the odd piece too thick for a side but too thin for sawing into two sides. If a suitable species it can be cut into fingerboards.