Mystery Guitar Truss Rod Repair

If you have a string instrument of any kind that needs fixing, a mistake you made in building a new instrument that you need to "disappear," or a question about the ethics of altering an older instrument, ask here. Please note that it will be much easier for us to help you decide on the best repair method if you post some pictures of the problem.
Post Reply
Andrew McSpadden
Posts: 83
Joined: Wed Jan 02, 2013 4:28 pm
Contact:
Contact Andrew McSpadden

Mystery Guitar Truss Rod Repair

Post by Andrew McSpadden »

I have an unknown guitar that a customer is set on getting restored. I took the neck off and the rod fell out on the floor. There is an aluminum channel in the neck. Anyone come across this rod before and know what is in the neck before I start dissecting it? Thanks!
Attachments
mystery one.JPG
Mystery 3.JPG
Mystery 2.JPG
Top
User avatar
Ryan Mazzocco
Posts: 605
Joined: Sat Feb 04, 2012 6:01 pm
Location: Joplin, MO
Contact:
Contact Ryan Mazzocco

Re: Mystery Guitar Truss Rod Repair

Post by Ryan Mazzocco »

It looks like a U-channel truss rod and the weld has broken at the headstock end.
Not sure if you can get it out... Maybe try tapping it with a bolt with a thread just big enough to bite into the aluminum and maybe you can pull it out without having to remove the fretboard. If the dimensions are the same you may be able to just get a replacement and slide it back in it's place.
Top
Post Reply

Return to “String Instrument Repair: Practical and Political Issues”