Can anyone tell me the actual measurement between the face of the nut and front (or center) of the saddle at both E strings on a Gibson 24-3/4" acoustic fretboard?
I know it's not exactly 24-3/4" and I know you can get it very close to perfect using special tools or jigs. I just want to know what the factory measurements should be to compare my guitar measurements. Just curious how far off this particular instrument might be.
Thanks.
Actual scale-length measurement on a Gibson 24-3/4" FB?
-
- Posts: 4
- Joined: Fri Sep 21, 2012 1:04 pm
-
- Posts: 497
- Joined: Mon Jan 09, 2012 2:02 pm
- Location: Baltimore, Maryland
Re: Actual scale-length measurement on a Gibson 24-3/4" FB?
Gibson's scale lengths are all over the place.
Measure from the nut to the 12th fret. That will be half the scale length. From the nut to the saddle, the high e should be the scale length + 1/16" and the low e should be the scale length + 3/16". These are approximations of the compensation, but should be close enough for you to check.
Measure from the nut to the 12th fret. That will be half the scale length. From the nut to the saddle, the high e should be the scale length + 1/16" and the low e should be the scale length + 3/16". These are approximations of the compensation, but should be close enough for you to check.
A man hears what he wants to hear, and disreguards the rest. Paul Simon
-
- Posts: 673
- Joined: Fri Jan 06, 2012 2:45 pm
Re: Actual scale-length measurement on a Gibson 24-3/4" FB?
Another way to check the scale is use WFRET. Print out the scale you anticipate, and hold the paper template on your neck.
If one or two of the frets are poorly placed, you can spot this.
If the scale is wrong, you can print another scale until it matches what you have.
If one or two of the frets are poorly placed, you can spot this.
If the scale is wrong, you can print another scale until it matches what you have.