16/15 Hammered Dulcimer Bridge Placement

If it's not a guitar or a bass guitar discussion, and it's got strings, put it here.

16/15 Hammered Dulcimer Bridge Placement

Postby Dylan Ball » Wed Feb 10, 2016 2:56 pm

Hello, I am in the process of tuning my 16/15 dulcimer I built from a custom kit and for some reason I cant find the correct placement for the treble and bass bridge, its badly out of intonation. Is there a specific distance inward from the left and right side bridges or?
Dylan Ball
Posts: 2
Joined: Wed Feb 10, 2016 2:16 pm

Re: 16/15 Hammered Dulcimer Bridge Placement

Postby Nic Hambas » Wed Nov 30, 2016 1:50 pm

I just saw this post for the first time ten months later. Wow! Not a single answer! Anyway, here's an answer for those who might have the same question: The treble bridge should be placed at exactly 2/5ths of the distance between side bridges. Final intonation may require some minute adjustments to that. The bass bridge should be placed at a safe distance to the right of the treble bridge so that the strings don't buzz under the treble bridge, but close enough so the player doesn't have to stretch too far between bridges. This improves playing speed. Final placement of the bass bridge, of course, depends on the gauge of the existing bass strings, but that is another story.
Nic Hambas
Posts: 7
Joined: Thu Mar 22, 2012 1:34 pm

Return to Other Stringed Instruments

Who is online

Users browsing this forum: No registered users and 5 guests

Your purchase from these sites helps support the MIMForum, but only if you start at the links below!!!
Amazon music     Amazon books     Amazon tools     Rockler tools     Office Depot    

The MIMF is a member-supported forum, please consider supporting us with a donation, thanks!
 • Book store • Tool store • Links •