fretboard dots

TEST ON SCRAP FIRST! If your question is about repair work, either regluing or refinishing, please post it in our Repair Section.

fretboard dots

Postby Alan Bates » Sun Apr 15, 2018 9:28 pm

I am looking for a posting or discussion about position of dots of fretboards. I ask because I made a banjo for my partner and mistakenly put a dot on the 9th fret and discovered that banjos seem to have that dot on the 10th fret. Guitars seem to be at the 9th fret. Mandolins seem to have it at the 10th. What gives here?
Alan Bates
Posts: 9
Joined: Sat Mar 01, 2014 5:16 pm

Re: fretboard dots

Postby Christ Kacoyannakis » Sun Apr 15, 2018 9:38 pm

Greek bouzoukis have the dot on the 10th fret. The Greek bouzouki is tuned CFAD (low - high) so the 10th fret is C.
Christ Kacoyannakis
Posts: 143
Joined: Sat Jan 07, 2012 8:58 pm

Re: fretboard dots

Postby Pete Halliday » Mon Apr 16, 2018 11:44 am

Turn it into a tree of life inlay ;-)
User avatar
Pete Halliday
Posts: 114
Joined: Sun Jan 29, 2012 10:50 am
Location: Canton, MI

Re: fretboard dots

Postby Clay Schaeffer » Mon Apr 16, 2018 7:21 pm

If the wood is ebony you have a fair chance of hiding the repair. other woods you have to match the color and grain orientation and hope for some luck. Sometimes you can rout out the surface of the board between the two frets and inlay a matching piece of wood between them.
Tenor banjos were tuned in fifths between courses as were mandolins and violins. Guitars are tuned in fourths (and a third) between courses which may account for the difference in position markers. Why a 5 string banjo would use markers similar to a tenor - I have no idea!
Clay Schaeffer
Posts: 1096
Joined: Fri Jan 06, 2012 12:04 pm

Re: fretboard dots

Postby Bill Raymond » Mon Apr 16, 2018 11:53 pm

Selmer guitars, and I believe also some other guitars of European provenance have the dots at the 10th fret and not the 9th. American guitars seem to be consistent in placing the dot at the 9th fret.
Bill Raymond
Posts: 313
Joined: Fri Jan 06, 2012 5:37 pm
Location: Red Bluff California

Re: fretboard dots

Postby Dan Smith » Wed Apr 18, 2018 11:03 am

Been there too.
Fairly easy to inlay a piece as suggested.
Ever-body was kung fu fight-in,
Them kids was fast as light-nin.
User avatar
Dan Smith
Posts: 319
Joined: Mon May 18, 2015 9:33 pm
Location: Texas

Re: fretboard dots

Postby Alan Carruth » Wed Apr 18, 2018 12:38 pm

It may have to do with the tuning. Guitars are tuned with strings at intervals of 4ths and one 3d. Banjos and mandolins are normally tuned in fifths.
Alan Carruth
Posts: 779
Joined: Sun Jan 15, 2012 1:11 pm

Return to Glues and Finishes

Who is online

Users browsing this forum: No registered users and 1 guest

Your purchase from these sites helps support the MIMForum, but only if you start at the links below!!!
Amazon music     Amazon books     Amazon tools     Rockler tools     Office Depot    

The MIMF is a member-supported forum, please consider supporting us with a donation, thanks!
 • Book store • Tool store • Links •