StewMac tools

Cracking Lacquer ???

TEST ON SCRAP FIRST! If your question is about repair work, either regluing or refinishing, please post it in our Repair Section.

Cracking Lacquer ???

Postby Robert Freemond » Fri Apr 21, 2017 2:13 am

Just finished my 1st Lacquer job after numerous KTM's (with mixed results). It was on a rework of an older practice guitar so I wasn't that worried if it didn't pan out. I was so pleased at how it went on that I thought this might be my new approach. It's been curing for about 3 weeks now & the finish is starting to crack - mostly around the bridge & sound hole.
I used Mohawk Per Catalyzed gloss, multi coats at one hour intervals. with a base of shellack.
Any clues as to what I might have done wrong.
Robert Freemond
 
Posts: 82
Joined: Tue Jan 24, 2012 4:11 am
Location: Van Nuys Ca.

Return to Glues and Finishes

Who is online

Users browsing this forum: No registered users and 1 guest

Your purchase from these sites helps support the MIMForum, but only if you start at the links below!!!
Amazon music     Amazon books     Amazon tools     Rockler tools     Office Depot    

The MIMF is a member-supported forum, please consider supporting us with a donation, thanks!
 • Book store • Tool store • Links •