Amps for setups

Questions about tools and jigs you want to buy/build/modify.

Amps for setups

Postby Ido Oz » Mon Nov 06, 2017 9:45 am

Hi everybody
I would be happy if you could explain what features are important when choosing an amp for testing pickups during setups and new builds, furthermore it would be great if you'll recommend specific models. Thank you.
Ido Oz
Posts: 4
Joined: Mon Nov 06, 2017 6:10 am

Re: Amps for setups

Postby Greg Steil » Mon Nov 06, 2017 6:22 pm

Roland Micro Cube....fits on any bench and will be all you need.
Greg Steil
Posts: 142
Joined: Sat Jan 07, 2012 7:54 pm

Re: Amps for setups

Postby Rodger Knox » Tue Nov 07, 2017 12:49 pm

That depends on what you mean by "testing pickups". Anything is fine if all you are interested in is seeing that they work.
If you need to hear how they sound, the answer is more complicated.
A man hears what he wants to hear, and disreguards the rest. Paul Simon
Rodger Knox
Posts: 485
Joined: Mon Jan 09, 2012 2:02 pm
Location: Baltimore, Maryland

Re: Amps for setups

Postby Ido Oz » Wed Nov 08, 2017 4:16 am

Yes, I need to hear how they sound.
Ido Oz
Posts: 4
Joined: Mon Nov 06, 2017 6:10 am

Re: Amps for setups

Postby Gordon Bellerose » Wed Nov 08, 2017 12:04 pm

That is a very difficult question.
There are too many factors influencing pickup tones, to truly hear what each and every type sounds like.

I suppose the quick answer would be to buy the best tube amp you can afford. Something with a 10 or 12 inch speaker.
Anywhere from 15 to 60 watts, and with 2 channels if possible.
This seems to be the configuration a lot of gig players go with.
A tube amp will give you a more honest read than any modelling amp, in my opinion.
Fender amps seem to be the average cost, clean sounding amps, but there are many brands out there.

When I build guitars, I go for a clean sound. Clean is more difficult than dirty. Dirt can be accomplished easily with a stomp box.
Again, this is only my opinion.
I need your help. I can't possibly make all the mistakes myself!
Gordon Bellerose
Posts: 984
Joined: Wed May 30, 2012 11:47 pm
Location: Edmonton AB. Canada

Re: Amps for setups

Postby David King » Thu Nov 09, 2017 5:04 pm

There's probably a decent amp for every budget. If you want to save a bit you'll have to look for vintage amps that are currently out of fashion. The perennial favorites will always be fetching top dollar.
David King
Posts: 2328
Joined: Sat Jan 07, 2012 10:01 pm
Location: Portland, OR

Re: Amps for setups

Postby Todd Stock » Fri Nov 10, 2017 9:42 pm

A used Genz-Benz Shenandoah 85 and a kitted Fender Deluxe...less than $300 for each. The G-B is for acoustic installs (takes some time to get things right on some pickup systems) and sussing out mag pup issues, while the Deluxe is decent for the stuff that normally gets plugged in. Had a Cube on the bench - not enough when folks are paying you for your time.
Todd Stock
Posts: 385
Joined: Tue Feb 28, 2012 7:57 pm

Re: Amps for setups

Postby Matthew Lau » Fri Nov 10, 2017 11:54 pm

Dang, all I have is a pignose amp and an amplug vox 18.
Matthew Lau
Posts: 390
Joined: Sat Feb 18, 2012 2:03 am

Re: Amps for setups

Postby Ido Oz » Sun Nov 12, 2017 8:51 am

Thank you very much for your answers, I appreciate it.
Ido Oz
Posts: 4
Joined: Mon Nov 06, 2017 6:10 am

Return to Tools and Jigs

Who is online

Users browsing this forum: No registered users and 1 guest

Your purchase from these sites helps support the MIMForum, but only if you start at the links below!!!
Amazon music     Amazon books     Amazon tools     Rockler tools     Office Depot    

The MIMF is a member-supported forum, please consider supporting us with a donation, thanks!
 • Book store • Tool store • Links •