Basswood strips

Ask your wood and other materials questions here. Please DO NOT post pictures and ask us to identify your wood, we have found that accurate ID is nearly impossible, and such discussions will be deleted. Thanks.
Post Reply
Darrell Parks
Posts: 1
Joined: Sat Jan 07, 2012 8:19 pm

Basswood strips

Post by Darrell Parks »

Saw some basswood strips at a hobby shop. It appears that two pieces bent and fastened into a hoop would make a banjo body for an old time banjo. Anyone have any experience or advice on this? Steamed or moistened and wrapped around a form?

User avatar
Mark Swanson
Posts: 1972
Joined: Thu Jan 05, 2012 11:11 am
Location: Grand Rapids, Michigan USA
Contact:

Re: Basswood strips

Post by Mark Swanson »

There's a few different ways to make a banjo pot. I had one once that was made in two halves, and joined at the neck and the end pin, it was not very good. Gluing the pieces together at those points is not a strong way to do it. Have a look on the web, or here in our Archives and see how others are doing it.
  • Mark Swanson, guitarist, MIMForum Staff

Michael Lewis
Posts: 1472
Joined: Thu Jan 12, 2012 1:22 am
Location: Northern California USA
Contact:

Re: Basswood strips

Post by Michael Lewis »

It doesn't matter what you make it from if you only want to look at it, but if you want to actually use the instrument you will need some structure to counteract the string tension. There is a reason that stout rims are the norm these days. Check with Jon Whitney for some intriguing ideas for making banjos.

Bob Menzel
Posts: 75
Joined: Sun Jan 08, 2012 3:40 pm
Location: LINY

Re: Basswood strips

Post by Bob Menzel »

What the others said, plus: Basswood likes to kink when bent.
Not Your Uncle

Post Reply