Could someone offer a couple pointers on my scroll carving (photos)

Please put any questions about repairing your instrument or the finish on it in our Repairs section.

Could someone offer a couple pointers on my scroll carving (photos)

Postby Craig Hodges » Sat May 12, 2012 10:37 am

I'm working on an electric violin for my daughter. This one has a simplified scroll as the tuners are on the opposite end of the strings. I wanted to emulate an acoustic violin scroll on the bottom. I'm am concerned that when a gloss finish is applied the carved profile imperfections will be obvious. I have a hard rubber cylinder that I've used to sand the profile, but this only highlights the imperfections. Wondered what tools and techniques others use to create this feature. Thanks for any suggestions!
Attachments
IMG_0138b.jpg
Photo 3
IMG_0144b.jpg
Photo 2
IMG_0145b.jpg
Photo 1
User avatar
Craig Hodges
 
Posts: 9
Joined: Sat May 12, 2012 10:21 am

Re: Could someone offer a couple pointers on my scroll carving (photos)

Postby Chet Bishop » Sat May 12, 2012 1:25 pm

Have you tried a scraper? I make scrapers of hard steel, quite thin (.015"?) Blue-tempered watch-spring works well, or, if you can find an old drywall mudding knife (especially a large one) you can make several out of such a blade.

I have scrapers I made that somewhat fit the curve of the cross-section of one channel, and others with a much larger radius, that I use laterally, to good effect.

There are numerous on-line explanations of how to sharpen a scraper.

Chet
Chet Bishop
Violin-family instruments
Forest Grove, Oregon
Chet Bishop
 
Posts: 85
Joined: Thu Mar 08, 2012 3:50 pm

Re: Could someone offer a couple pointers on my scroll carving (photos)

Postby Craig Hodges » Sat May 12, 2012 10:36 pm

Thanks for the great suggestion for materials to make a special scraper from Chet. The sheetrock mudding knife hadn't occured to me as a good heat treated raw material for a custom scraper - I'll be trying that!
User avatar
Craig Hodges
 
Posts: 9
Joined: Sat May 12, 2012 10:21 am

Re: Could someone offer a couple pointers on my scroll carving (photos)

Postby Chuck Tweedy » Tue May 15, 2012 6:49 pm

I'm no expert, but it does not look horrible to me. I'd expect my first attempt at a violin head-piece to be much more frightening than that. :-)
Likes to drink Rosewood Juice
Chuck Tweedy
 
Posts: 1111
Joined: Fri Jan 06, 2012 6:25 pm
Location: San Diego, CA

Re: Could someone offer a couple pointers on my scroll carving (photos)

Postby Barry Guest » Tue May 15, 2012 8:18 pm

I would follow Chucks suggestions, especially the one that it doesn't look like it needs much more attention. Even the great Stradivari left tool marks under his varnish.
Alumnus of Wood and Strings
User avatar
Barry Guest
 
Posts: 115
Joined: Sat Jan 07, 2012 10:40 pm
Location: Sydney, Australia

Re: Could someone offer a couple pointers on my scroll carving (photos)

Postby Chuck Tweedy » Tue May 15, 2012 9:48 pm

Hey Barry, I didn't really suggest anything. :P
I think it was Chet.
Likes to drink Rosewood Juice
Chuck Tweedy
 
Posts: 1111
Joined: Fri Jan 06, 2012 6:25 pm
Location: San Diego, CA

Re: Could someone offer a couple pointers on my scroll carving (photos)

Postby Craig Hodges » Wed May 16, 2012 1:37 am

Thanks for the encouragement. Chet, I did try a scraper and what a difference that made. Scrapers are a miraculous invention. I'm off and running again.
User avatar
Craig Hodges
 
Posts: 9
Joined: Sat May 12, 2012 10:21 am

Re: Could someone offer a couple pointers on my scroll carving (photos)

Postby Chet Bishop » Wed May 16, 2012 10:15 am

Keep 'em really sharp, and they do some great things.
Keep us posted.
Chet Bishop
Violin-family instruments
Forest Grove, Oregon
Chet Bishop
 
Posts: 85
Joined: Thu Mar 08, 2012 3:50 pm

Re: Could someone offer a couple pointers on my scroll carving (photos)

Postby Barry Guest » Sat May 19, 2012 5:01 am

Sorry Chuck, my dysfunctional brain is seeing Chuck when it should see Chet.
Alumnus of Wood and Strings
User avatar
Barry Guest
 
Posts: 115
Joined: Sat Jan 07, 2012 10:40 pm
Location: Sydney, Australia


Return to Bowed Stringed Instruments and Bows

Who is online

Users browsing this forum: No registered users and 1 guest

Your purchase from these sites helps support the MIMForum, but only if you start at the links below!!!
Amazon music     Amazon books     Amazon tools     Rockler tools     Office Depot    

The MIMF is a member-supported forum, please consider supporting us with a donation, thanks!
 • Book store • Tool store • Links •