Assilex and Buflex
-
- Posts: 41
- Joined: Fri Jun 01, 2012 1:45 pm
Assilex and Buflex
Any builders here using Assilex or Bufflex sanding material on their finishes? I just got some Assilex today and it is a pretty awesome product for sanding nitro and waterborne. Especially good because no need for soap and water. Since I'm new to it's use, and there are quite a few grits in the product line, just wondering what grits people might be using prior to buffing finishes. It is expensive, which will stop a lot of folks from buying it, but I think it is good stuff.Thanks, Bob
- Barry Daniels
- Posts: 3220
- Joined: Thu Jan 05, 2012 10:58 am
- Location: The Woodlands, Texas
Re: Assilex and Buflex
I love Assilex and I have 800 up to 1500 grit. I also use Abralon pads and have it in 2000 and 4000 grit. Sanding to 4000 grit makes buffing incredibly easy. I use a bit of soapy water with the Abralon.
MIMF Staff
-
- Posts: 41
- Joined: Fri Jun 01, 2012 1:45 pm
Re: Assilex and Buflex
Thanks Barry. I use Abralon too. great product.
- Barry Daniels
- Posts: 3220
- Joined: Thu Jan 05, 2012 10:58 am
- Location: The Woodlands, Texas
Re: Assilex and Buflex
Another good new sanding product is the Kovax Tolecut sanding film that comes in 1"x1" sticky back squares. They’re great for leveling small finish touchups or drop fills and not creating what I call the volcano effect; where you remove a ring of the existing finish around the drop fill you’re trying to level. Here’s a link to what I’m talking about.
https://www.stewmac.com/luthier-tools-a ... 3IEALw_wcB
https://www.stewmac.com/luthier-tools-a ... 3IEALw_wcB
MIMF Staff