Sansula
Sansula
Has any one any tips on how to make a Sansula (which seems to be a kalimba mounted on a stretched skin)
Would the skin be stretched on an open backed frame or closed? and how would the kalimba bit be stuck to the skin?
This is so far just an idea floating round in my head.
How to stretch the skin on what is the first problem.
I have an old dried out skin off a banjo mandolin that has torn itself into a circle about 10" round if I can figure out how to make it pliable enough. I am going to put a new skin on the Banjo
Would the skin be stretched on an open backed frame or closed? and how would the kalimba bit be stuck to the skin?
This is so far just an idea floating round in my head.
How to stretch the skin on what is the first problem.
I have an old dried out skin off a banjo mandolin that has torn itself into a circle about 10" round if I can figure out how to make it pliable enough. I am going to put a new skin on the Banjo
- Jim McConkey
- Posts: 1019
- Joined: Thu Jan 05, 2012 4:00 pm
- Location: Way north of Baltimore, MD
Re: Sansula
Please note that Forum rules require that you use your full name, not an initial. Please edit your profile and add your name.
Be sure to read the Bowl Drum discussion in this section. Basically, you soak the head in a sink or large bowl of water overnight and it becomes very pliable. You stretch it over your frame and tack it in place while it is wet, and it will become taught as it dries. I imagine the kalimba is just glued to the top, after it has thoroughly dried.
Be sure to read the Bowl Drum discussion in this section. Basically, you soak the head in a sink or large bowl of water overnight and it becomes very pliable. You stretch it over your frame and tack it in place while it is wet, and it will become taught as it dries. I imagine the kalimba is just glued to the top, after it has thoroughly dried.
MIMForum Staff - Way North of Baltimore
Re: Sansula
Who says that F is not my full name?
- Jim McConkey
- Posts: 1019
- Joined: Thu Jan 05, 2012 4:00 pm
- Location: Way north of Baltimore, MD
- Jim McConkey
- Posts: 1019
- Joined: Thu Jan 05, 2012 4:00 pm
- Location: Way north of Baltimore, MD
Re: Sansula
You might want to watch this video on bodhran construction. At about 5:00 he applies a water-based glue to the rim, stretches the wet head over it, and just "clamps" the rim with a piece of elastic until both glue and head dry. He says he actually prefers gluing to using tacks or laces because he almost never sees tearout, which occurs with the latter two occasionally.
MIMForum Staff - Way North of Baltimore
-
- Posts: 76
- Joined: Fri Jul 28, 2023 2:08 am
Re: Sansula
I think this is similar to a topic in another thread. I guess this thread shed a light on my question.
-
- Posts: 76
- Joined: Fri Jul 28, 2023 2:08 am
Re: Sansula
I've checked the video and found it very entertaining and educational.Jim McConkey wrote: ↑Mon Mar 06, 2017 10:04 pm You might want to watch this video on bodhran construction. At about 5:00 he applies a water-based glue to the rim, stretches the wet head over it, and just "clamps" the rim with a piece of elastic until both glue and head dry. He says he actually prefers gluing to using tacks or laces because he almost never sees tearout, which occurs with the latter two occasionally.
-
- Posts: 76
- Joined: Fri Jul 28, 2023 2:08 am
Re: Sansula
I thought you may find this article useful about the different styles of bodhran and techniques:
medium.com/@cassidybole0712/exploring-different-bodhran-styles-and-techniques-f79631e6d1c0
medium.com/@cassidybole0712/exploring-different-bodhran-styles-and-techniques-f79631e6d1c0
- Jim McConkey
- Posts: 1019
- Joined: Thu Jan 05, 2012 4:00 pm
- Location: Way north of Baltimore, MD
- Eric Knapp
- Posts: 614
- Joined: Mon May 02, 2016 2:01 pm
- Location: Wisconsin, USA
- Contact:
-
- Posts: 76
- Joined: Fri Jul 28, 2023 2:08 am
Re: Sansula
Thank you for that Eric.