A different look for maple fingerboards?

Please put your pickup/wiring discussions in the Electronics section; and put discussions about repair issues, including "disappearing" errors in new instruments, in the Repairs section.
Post Reply
gene downs
Posts: 20
Joined: Thu Sep 20, 2012 1:58 pm

A different look for maple fingerboards?

Post by gene downs »

Maple f'boards are about the only reasonably priced thing going. But that maple look doesn't work for every guitar, of course.

Has anyone experimented with stains and such on maple? Does anything look good?
Brent Tobin
Posts: 26
Joined: Fri Apr 12, 2013 4:05 pm

Re: A different look for maple fingerboards?

Post by Brent Tobin »

I have some parts from an old German luthier that were 'ebonized' maple. The look is pretty good but i'd be careful if I had to sand them.
Better to have a bottle in front of me than a frontal lobotomy
User avatar
Barry Daniels
Posts: 3186
Joined: Thu Jan 05, 2012 10:58 am
Location: The Woodlands, Texas

Re: A different look for maple fingerboards?

Post by Barry Daniels »

Stain good. Dye too.
MIMF Staff
User avatar
Jim McConkey
Posts: 1061
Joined: Thu Jan 05, 2012 4:00 pm
Location: Way north of Baltimore, MD

Re: A different look for maple fingerboards?

Post by Jim McConkey »

Lots of cheaper violins have white fretboards that have been ebonized. Check your favorite supplier for fingerboard stain. Relatively cheap!
MIMForum Staff - Way North of Baltimore
David King
Posts: 2690
Joined: Sat Jan 07, 2012 10:01 pm
Location: Portland, OR
Contact:

Re: A different look for maple fingerboards?

Post by David King »

You might look at wood that's a bit harder and more stable than maple if you can source it. Shagbark hickory, black locust, and iron wood are all pretty common in the Northeast. The Southwest has mesquite and the Northwest has mountain mahogany but that's getting pretty rare now. Midwest is all about Osage Orange if you are lucky.
Post Reply

Return to “Solid-Body and Chambered or Semi-Solid Electric Guitars and Bass Guitars”