Setting a tablesaw fence with digital calipers

Questions about tools and jigs you want to buy/build/modify.
Post Reply
Paul Montgomery
Posts: 33
Joined: Fri Mar 23, 2018 9:09 pm

Setting a tablesaw fence with digital calipers

Post by Paul Montgomery »

I know this could be a little flashier (maybe later), but it works. I can use this handy little jig to accurately set my fence to a thousandth of an inch. As well, it works to calibrate the fence so that it is parallel to the blade.

https://youtu.be/XHGwqWWHwXY

Bob Francis
Posts: 531
Joined: Wed Jan 11, 2012 6:28 pm

Re: Setting a tablesaw fence with digital calipers

Post by Bob Francis »

Nice work Paul.

Paul Montgomery
Posts: 33
Joined: Fri Mar 23, 2018 9:09 pm

Re: Setting a tablesaw fence with digital calipers

Post by Paul Montgomery »

Thanks. Hopefully it will help someone else.

Clay Schaeffer
Posts: 1510
Joined: Fri Jan 06, 2012 12:04 pm

Re: Setting a tablesaw fence with digital calipers

Post by Clay Schaeffer »

Cool! Simple but accurate. I like it.

Post Reply