Charlie Christian pickup with coil tap/

Pickups, magnets, microphones, amps, speakers, cabs, whatever...
Post Reply
Brian Evans
Posts: 878
Joined: Sat Aug 30, 2014 8:26 am
Location: Tatamagouche, Nova Scotia

Charlie Christian pickup with coil tap/

Post by Brian Evans »

I read somewhere about a CC pickup being made that had a coil tap so that you could add a switch and get a slightly different sound, or simply wire up the tap that you preferred. I can't for the life of me find it now. Any ideas?

David King
Posts: 2672
Joined: Sat Jan 07, 2012 10:01 pm
Location: Portland, OR
Contact:

Re: Charlie Christian pickup with coil tap/

Post by David King »

I'm pretty sure any of the pickup makers doing these pickups could accommodate a tap for you.

User avatar
Randolph Rhett
Posts: 348
Joined: Mon Aug 06, 2012 5:19 pm
Location: San Diego, CA
Contact:

Re: Charlie Christian pickup with coil tap/

Post by Randolph Rhett »

I believe CC pickups are single coil, so do you mean a tap to split the winding? So like after 5,000 windings you insert a switch and then do 5,000 more windings?

I've never heard of that, but the best CC pickups I've ever used are from Pete Biltoff at Vintage Vibe Guitars. He sends them to you with an extra set of magnets, so you can play them with Anilco II or V, for example. He also will build you pretty much whatever you want for not too unreasonable a cost. I have never heard of a pickup like you want, but Pete can probably build it for you.

Brian Evans
Posts: 878
Joined: Sat Aug 30, 2014 8:26 am
Location: Tatamagouche, Nova Scotia

Re: Charlie Christian pickup with coil tap/

Post by Brian Evans »

I found the one I was looking for. He quoted me an no-VAT price because I am outside EU, in Canada. https://www.rautiaguitars.net/ccbar.html

Post Reply