Planning a Lap Steel

If it's not a guitar or a bass guitar discussion, and it's got strings, put it here.

Planning a Lap Steel

Postby Alain Lambert » Wed Oct 24, 2018 3:08 pm

I decided to try building a Lap Steel Guitar an I need some guidance. I never played or seen one except in photos, so I really need some experienced opinion.
I have read several forums and it seems that a string spacing of 3/8 is about right.
Is this 3/8 between strings or center to center? If center to center, this would give a 1 7/8 (48 mm) total string spacing at the nut and bridge.
I often see string spacing reported as 52,54, even 58 mm which does not match the above! Can someone clarify that for me please.

I am planing a scale length of 22.5 in. which I understand is easier for beginners.
I have a used pickup which have a string spacing of just under 2 in (50 mm) and would like to use that.

So far I am planning with the following dimensions
String spacing at the nut : 1 7/8"
String spacing at the bridge: 2 "
Scale length: 22.5"

Does that seems right?
Should I look for a wider pickup?

Thanks all
Alain Lambert
 
Posts: 82
Joined: Sat Jan 07, 2012 7:18 pm
Location: Trois-Rivieres, Quebec

Re: Planning a Lap Steel

Postby Peter Wilcox » Wed Oct 24, 2018 9:20 pm

Alain - I've made a couple of lap steels, a 6 string and an 8 string. I used 3/8" at the nut and 7/16" at the bridge for the 6 string, center to center (because that's the way my dobro is). That's a little wide for the pickups I used, but it works OK. I did 3/8" at the bridge and nut for the 8 string, and made my own pickup to fit.

Then I found this:
http://web.archive.org/web/201604060921 ... gChart.pdf

Also some other very helpful stuff on the site:
http://web.archive.org/web/201603250214 ... page5.html
http://web.archive.org/web/201603181218 ... page9.html
http://web.archive.org/web/201604061246 ... etPlan.pdf

It's an archived inactive site and I was just lucky to come across it.

Good luck with the lap steels - I'm going to try a few more.
Maybe I can't fix it, but I can fix it so no one can fix it
User avatar
Peter Wilcox
 
Posts: 1065
Joined: Sun Jan 08, 2012 1:31 am
Location: Northeastern California

Re: Planning a Lap Steel

Postby Alain Lambert » Thu Oct 25, 2018 9:52 am

Thank you Peter, this is exactly what I need.
This will get me going!
Alain Lambert
 
Posts: 82
Joined: Sat Jan 07, 2012 7:18 pm
Location: Trois-Rivieres, Quebec

Re: Planning a Lap Steel

Postby Peter Wilcox » Thu Oct 25, 2018 12:29 pm

I'm glad I could help. Also, here's a link to photos of some beautiful lap steels made by Tom Pettingill, who sadly passed away last year.

http://s302.photobucket.com/user/tompet ... t=3&page=1

I don't know if one is able to view unsupported Photobucket pics any more, but you can install an app into your browser if necessary to be able to view them (which I've done). Explanation in this thread. viewtopic.php?f=17&t=5328
Maybe I can't fix it, but I can fix it so no one can fix it
User avatar
Peter Wilcox
 
Posts: 1065
Joined: Sun Jan 08, 2012 1:31 am
Location: Northeastern California

Re: Planning a Lap Steel

Postby Alain Lambert » Thu Oct 25, 2018 6:13 pm

Wow, beautifull!
Alain Lambert
 
Posts: 82
Joined: Sat Jan 07, 2012 7:18 pm
Location: Trois-Rivieres, Quebec


Return to Other Stringed Instruments

Who is online

Users browsing this forum: No registered users and 0 guests

Your purchase from these sites helps support the MIMForum, but only if you start at the links below!!!
Amazon music     Amazon books     Amazon tools     Rockler tools     Office Depot    

The MIMF is a member-supported forum, please consider supporting us with a donation, thanks!
 • Book store • Tool store • Links • 
cron