Has anyone seen this and experimented with it? Furniture makers are liking it and it seems interesting. They process wood so it can be bent cold. Crazy.
http://www.puretimber.com/guitar-sides/
-Eric
Cold Bendable Wood
- Eric Knapp
- Posts: 620
- Joined: Mon May 02, 2016 2:01 pm
- Location: Wisconsin, USA
- Contact:
Re: Cold Bendable Wood
Had a look but wood is moist when shipped and must be moist to be cold bent. Would be concerned about movement when it dries out. Bob
- Bryan Bear
- Posts: 1375
- Joined: Fri Jan 06, 2012 1:05 pm
- Location: St. Louis, MO
Re: Cold Bendable Wood
While this looks really cool and makes me want to know more about how the process works, I don't see a reason for it in guitar making. It's not like side bending is difficult in any of the woods they offer and they don't say anything about offering backs that are matched to the side woods (unless I missed it). As it pertains to guitar making it seems like a solution without a problem, but I'm sure there are tons of other applications where this would be wonderful.
I will concede that the thicker sides is of potential benefit but there are other ways to stiffen and add mass.
I still really what to know what is going on that allows it to bend cold!
I will concede that the thicker sides is of potential benefit but there are other ways to stiffen and add mass.
I still really what to know what is going on that allows it to bend cold!
PMoMC
Take care of your feet and your feet will take care of you.
Take care of your feet and your feet will take care of you.
- Eric Knapp
- Posts: 620
- Joined: Mon May 02, 2016 2:01 pm
- Location: Wisconsin, USA
- Contact:
Re: Cold Bendable Wood
They compress the wood from end to end with heat, moisture, and a lot of force. You can then bend it and the parts that are stretching are just returning to their original length. Pretty clever.
-Eric
-Eric
- Bryan Bear
- Posts: 1375
- Joined: Fri Jan 06, 2012 1:05 pm
- Location: St. Louis, MO
- Steve Sawyer
- Posts: 965
- Joined: Wed Jan 02, 2013 2:20 pm
- Location: Detroit, Michigan
Re: Cold Bendable Wood
A fellow in my woodworking club who is a professional furniture builder (very high-end, one-of-kind art pieces) uses this stuff. He veneers his pieces extensively, so he is very sensitive to wood movement, so once it sets after bending, it must be highly stable. I too wonder as to its application in acoustic guitar building, though it might have some interesting uses for a solid-body or semi-hollow body guitar.
==Steve==
- Randolph Rhett
- Posts: 349
- Joined: Mon Aug 06, 2012 5:19 pm
- Location: San Diego, CA
- Contact:
Re: Cold Bendable Wood
Laminated sides are "cold bendable" too. They are also very rigid, stable, as thick as you want them to be, and can have a face veneer that matches your back. I have to agree that it looks like a solution looking for a problem in lutherie. Cool for cabinet work though.
Re: Cold Bendable Wood
local cabinetmaker uses it to great advantage. He bought a 3 X 6 of cherry and made all of the bendy parts of this piece out of it:
http://www.viccovonvoss.com/furniture/2 ... ters-edge/
As has been said - a solution in search of a problem for guitars
http://www.viccovonvoss.com/furniture/2 ... ters-edge/
As has been said - a solution in search of a problem for guitars