banjo mandolin??

If you have a string instrument of any kind that needs fixing, a mistake you made in building a new instrument that you need to "disappear," or a question about the ethics of altering an older instrument, ask here. Please note that it will be much easier for us to help you decide on the best repair method if you post some pictures of the problem.

banjo mandolin??

Postby F murtz » Fri Feb 03, 2012 6:47 am

F murtz
 
Posts: 17
Joined: Fri Feb 03, 2012 6:26 am

Re: banjo mandolin??

Postby John Hamlett » Fri Feb 03, 2012 11:03 am

Looks like a good starting point. You could have it playable with a little glue, a new head, a bridge and a set of strings. A little more work and it could look much better.
John Hamlett
 
Posts: 110
Joined: Thu Feb 02, 2012 10:59 am

Re: banjo mandolin??

Postby Steve Senseney » Fri Feb 03, 2012 11:36 am

I have one which was in excellent condition when I got it.

You have a lot of wood working to do.

The one aspect which is good, is that you seem to have all of the hardware in fairly good condition.

Depending on your interest and skills, I think it can be resurrected.

I am sure you will learn a great deal by doing this.
Steve Senseney
 
Posts: 673
Joined: Fri Jan 06, 2012 2:45 pm

Re: banjo mandolin??

Postby Jim McConkey » Fri Feb 03, 2012 12:49 pm

Nothing too difficult to fix there. If you have a source of compressed air (or just blow hard!), blow any loose stuff out of the places to be glued first. Make yourself a caul with the diameter of the pot, work some hot hide glue into the delaminating pot side, and use the caul to clamp it (with some wax paper, so the caul doesn't get glued to the pot). Hot hide glue is better than anything out of a bottle for this job because it will work its way into the tight places better. Gluing the back to the pot should be easy. The small missing chunks on the back could be replaced, but I'm not sure it wouldn't ruin the "character" of this old instrument. The old Library hasn't been moved over yet, but I had a tutorial there on replacing a head. You can still read it on the old forum for a while.
MIMForum Staff - Way North of Baltimore
User avatar
Jim McConkey
 
Posts: 881
Joined: Thu Jan 05, 2012 4:00 pm
Location: Way north of Baltimore, MD

Re: banjo mandolin??

Postby F murtz » Fri Feb 03, 2012 11:55 pm

I was thinking of attempting to rebuild with new materials using existing as a guide but do you think it would be better to try repairing what is there keeping its character?
F murtz
 
Posts: 17
Joined: Fri Feb 03, 2012 6:26 am

Re: banjo mandolin??

Postby Steve Senseney » Sat Feb 04, 2012 10:40 am

I can't really tell how bad the wood materials are.

You will have to make that decision.

I would recommend that you sit on it a while. Some times waiting a while, you will make a better choice.
Steve Senseney
 
Posts: 673
Joined: Fri Jan 06, 2012 2:45 pm

Re: banjo mandolin??

Postby Mario Proulx » Sat Feb 04, 2012 11:47 am

A roll of duct tape, a simple bridge, and fresh strings will have it playable in an hour... The Red Green banjolin!

Or find a pie plate or bowl or something that will fit upside down in it, make a simple biscuit bridge, and voila! Dobrolin.....

The possibilities are endless....
Mario Proulx
 
Posts: 819
Joined: Fri Jan 06, 2012 12:08 pm

Re: banjo mandolin??

Postby Darrel Friesen » Sun Feb 05, 2012 4:25 pm

I have one that's pretty much identical. The rim goes oval over a number of years due to string pull. A neck reset is in the plans at some point as a result. Another of my "ready for restoration" collection.
Darrel Friesen
 
Posts: 190
Joined: Fri Jan 06, 2012 5:48 pm

Re: banjo mandolin??

Postby Ron Belanger » Sun Feb 05, 2012 4:39 pm

What Mario said :lol: :lol:
Ron Belanger
 
Posts: 153
Joined: Fri Jan 06, 2012 8:54 pm
Location: Orillia, Ontario, Canada

Re: banjo mandolin??

Postby Patrick Hanna » Fri Feb 10, 2012 11:17 am

Go for it! I think it's a cool little instrument.
Patrick Hanna
 
Posts: 199
Joined: Sun Jan 08, 2012 10:49 am

Re: banjo mandolin??

Postby Lincoln Goertzen » Sat Feb 11, 2012 6:33 pm

Steve Senseney wrote:I can't really tell how bad the wood materials are.

You will have to make that decision.

I would recommend that you sit on it a while. Some times waiting a while, you will make a better choice.


Steve, I have to ask. Just what would you hope to achieve by sitting on it? And how long would you recommend sitting on it? :?
Lincoln Goertzen
 
Posts: 6
Joined: Fri Feb 10, 2012 7:05 pm

Re: banjo mandolin??

Postby Greg Robinson » Sat Feb 11, 2012 7:19 pm

Lincoln Goertzen wrote:
Steve Senseney wrote:I can't really tell how bad the wood materials are.

You will have to make that decision.

I would recommend that you sit on it a while. Some times waiting a while, you will make a better choice.


Steve, I have to ask. Just what would you hope to achieve by sitting on it? And how long would you recommend sitting on it? :?


The usual recommendation is one year per inch of thickness, so for me it should take twice as long, since I'm doubly thick... <g>
MIMForum staff member - Melbourne, Australia
User avatar
Greg Robinson
 
Posts: 686
Joined: Fri Jan 06, 2012 1:54 pm
Location: Coburg North, Victoria, Australia

Re: banjo mandolin??

Postby Steve Senseney » Sun Feb 12, 2012 9:24 am

Greg's reply is better than I can give.

I have looked at something, grabbed a sharp tool, started disassembly, lost interest, and stared at the project for years.

Later, when I look at it again, with a better idea of what I need or want to do, I lost pieces and did irreparable damage.

Just my experience.
Steve Senseney
 
Posts: 673
Joined: Fri Jan 06, 2012 2:45 pm


Return to String Instrument Repair: Practical and Political Issues

Who is online

Users browsing this forum: No registered users and 1 guest

Your purchase from these sites helps support the MIMForum, but only if you start at the links below!!!
Amazon music     Amazon books     Amazon tools     Rockler tools     Office Depot    

The MIMF is a member-supported forum, please consider supporting us with a donation, thanks!
 • Book store • Tool store • Links • 
cron