CNC for inlay work

CAD/CAM/CNC - hardware and software and its uses in luthiery
Post Reply
Danny Bingham
Posts: 2
Joined: Wed Sep 30, 2020 11:11 am

CNC for inlay work

Post by Danny Bingham »

I am interested in a CNC system for inlays in headstock overlay and fretboards, including cutting MOP. I would eventually like to use CNC to rough carve necks, archtops, violin tops, etc. but I am sure that require a more sophisticated system. I would appreciate any information from users on systems and software that can accomplish these goals.

Thanks,

Danny

Post Reply

Return to “CAD/CAM/CNC - hardware and software and its uses in luthiery”