I'm progressing with my HD build and I'm at the stage where I'm making the bridges. The plans I have are different from many of the HD i've seen online in that the top of the bridge is solid and will have a single piece of delrin across the top and not the alternating black/white pattern I've seen elsewhere.
I've notice that many HD have some mark on every 4th course. This is meant to assist in playing. What I don't know is what notes to start this on. Any suggestions on how to mark the bridges?
(Yes - I'm building an instrument I don't know how to play yet.)
How to mark HD bridges
-
David Knutson
- Posts: 12
- Joined: Thu Nov 10, 2022 9:43 pm
How to mark HD bridges
- Attachments
-
- Bridge2.PNG (94.82 KiB) Viewed 7324 times
-
Barry Daniels
- Posts: 3190
- Joined: Thu Jan 05, 2012 10:58 am
- Location: The Woodlands, Texas
-
Charlie Schultz
- Site Admin
- Posts: 1427
- Joined: Fri Dec 23, 2011 6:53 pm
- Location: St. Louis, MO
Re: How to mark HD bridges
I have a couple of HDs and neither of them has markings. My teacher never said anything about adding markers either. However, I did run across this pdf, and looking at page 10, there is a reference for adding markers at the root of the common major scales. https://www.westcoastharps.com/uploads/ ... lcimer.pdf