Building my 3rd Hurdy Gurdy

If it's not a guitar or a bass guitar discussion, and it's got strings, put it here.

Building my 3rd Hurdy Gurdy

Postby Paul Jenkin » Fri Aug 30, 2019 11:20 am

Hi all, i'm new to this group .. I'm building my 3rd Hurdy Gurdy .. I say 3rd the first one went in the bin, the 2nd went to the refuse tip. No 3 .. Well, I'm taking my time on this one .. Question if thats ok .. Can anyone tell me the length from the Bridge, or Drone Wheel to the Nut. I know the nut is made movable on the keybox and can be usefull for tuning. It's the string approx length i need to fit the keybox. Thanks Paul.J
Paul Jenkin
Posts: 1
Joined: Wed Aug 28, 2019 6:17 am

Re: Building my 3rd Hurdy Gurdy

Postby Bryan Bear » Fri Aug 30, 2019 11:30 am

I have no answer for you but wanted to say welcome and good luck on your Thirdy Gurdy! <G>

Take care of your feet and your feet will take care of you.
User avatar
Bryan Bear
Posts: 1183
Joined: Fri Jan 06, 2012 1:05 pm
Location: St. Louis, MO

Re: Building my 3rd Hurdy Gurdy

Postby Clay Schaeffer » Fri Aug 30, 2019 1:59 pm

The distance from the bridge to the nut all depends on the keybox. The tangents in the key box act as stops similar to what frets do on a guitar. It is slightly more complicated because in some cases they can be turned slightly for fine tuning which can make an exact determination of the scale length hard to do. To find the approximate bridge location align the tangents perpendicular to the melody string and measure from the tangent closest to the nut to the tangent that plays its octave and double this length. This will give the theoretical scale length from the first fret to the bridge. To find the scale length from the bridge to the nut multiply this distance by 105.94 . This should give the theoretical string length of the instrument. To this distance you will have to add a little bit of compensation by trial and error.
Stew Mac's fret calculator can give you the tangent to tangent (fret to fret) distances so you can check and adjust the individual tuning of the notes.

Charlie Schultz has built a gurdy so he can probably advise you better than I.
Clay Schaeffer
Posts: 1339
Joined: Fri Jan 06, 2012 12:04 pm

Re: Building my 3rd Hurdy Gurdy

Postby Chris Richards » Sun Sep 01, 2019 5:58 am

Most Hurdy Gurdys I've seen have around a 350mm scale length, anything shorter and it gets difficult to fit in the higher keys, the final few keys are not actually in the correct tuning positions, they are cranked to allow them to work and the final tuning is done by adjusting the tangents.

I would strongly recommend getting some good plans I have a few sets of different instruments and it's been valuable to be able to compare different construction methods and other details. One of the modern modifications is to incorporate a removable wheel so you don't have to wreck the instrument to remove it if something goes wrong.

There is a fair amount of info around the web and on youtube And it seems to me that because of the different tunings you can use and the number of strings you can build it with you almost have to decide what type of music you want to play before starting to build it.

Good luck..
Chris Richards
Posts: 284
Joined: Wed May 09, 2012 9:24 am
Location: London, England

Re: Building my 3rd Hurdy Gurdy

Postby Charlie Schultz » Sun Sep 01, 2019 12:10 pm

You can see my build here:

I used the GAL plan. I might also add that adding a strap really makes it easier to play.
User avatar
Charlie Schultz
Site Admin
Posts: 1305
Joined: Fri Dec 23, 2011 6:53 pm
Location: Atlanta, GA

Return to Other Stringed Instruments

Who is online

Users browsing this forum: No registered users and 2 guests

Your purchase from these sites helps support the MIMForum, but only if you start at the links below!!!
Amazon music     Amazon books     Amazon tools     Rockler tools     Office Depot    

The MIMF is a member-supported forum, please consider supporting us with a donation, thanks!
 • Book store • Tool store • Links •