Page 1 of 1

converting a cello to a bass viola da gamba

PostPosted: Thu Feb 21, 2019 12:56 pm
by craig cowing
I'm working on a project to convert a Cecilia C100 4/4 cello into a bas viola da gamba. I'm curious as to whether anyone else has tried this. Thoughts?

Re: converting a cello to a bass viola da gamba

PostPosted: Mon Feb 25, 2019 3:37 pm
by Fred Battershell
It all depends on the shape of gamba and whether you are going for the slanted back(among other things!). You are in for a lot of almost fruitless work. If you just want to play your cello like a gamba, you should remove cello strings(replace them with gamba strings),install frets on the fingerboard,lower the height of the nut and bridge,get rid of the cello endpin and make or install a new gamba style tailpiece and tail gut. PS: don't forget to always bow underhand!
Best of luck to you!
PPs: You should also get ahold of as much viol-related literature(especially containing pix) so that you will become acquainted with the differing shapes and sizes of viols as they have morphed thru time.

Re: converting a cello to a bass viola da gamba

PostPosted: Sun Mar 24, 2019 9:04 am
by Clay Schaeffer
Since the biggest differences are in the neck and pegbox (because of the additional strings) I would be inclined to pull the neck and make a completely new one. The cello neck could be saved. The same would apply to the bridge and tail piece, which would also need to be replaced. You may eventually want to make a more period correct body to go with the neck and appurtenances you will be making for the "conversion" so saving the original parts would allow you to put things back as they originally were and also have a cello.

Re: converting a cello to a bass viola da gamba

PostPosted: Wed May 22, 2019 3:27 am
by Calvin Buenavides
That surely is an interesting yet challenging project. I hope that you will be able to keep us updated with the progress.