It might end up a Theorbo - Randy Roberts

Post Reply
Randy Roberts
Posts: 465
Joined: Sat Jan 07, 2012 9:11 pm
Location: Omaha, NE (a suburb of Iowa)

It might end up a Theorbo - Randy Roberts

Post by Randy Roberts »

After several years of trying to get rid of the idea, I’ve more or less resigned myself to trying to build a theorbo. Why is beyond me.
I've never done any sort of bowl backed instrument before, and my understanding is that not much of what I've learned with guitars will be of much use with this project so this may end up more Laurel & Hardy than anything.

David Van Edwards in England was kind enough to send me his measurements of the Christoph Koch theorbo of 1650 that is in the Berlin Museum of Music, and so that's what I'll be guided by for the most part.
Jason Rodgers
Posts: 1554
Joined: Fri Jan 06, 2012 4:05 pm
Location: Portland, OR

Re: It might end up a Theorbo - Randy Roberts

Post by Jason Rodgers »

Dang, you ain't kidding with this theorbo business. Bring it on!
-Ruining perfectly good wood, one day at a time.
Randy Roberts
Posts: 465
Joined: Sat Jan 07, 2012 9:11 pm
Location: Omaha, NE (a suburb of Iowa)

Re: It might end up a Theorbo - Randy Roberts

Post by Randy Roberts »

I’ve got as far as partially completing the mold
Attachments
mold-rear.jpg
mold-front.jpg
Randy Roberts
Posts: 465
Joined: Sat Jan 07, 2012 9:11 pm
Location: Omaha, NE (a suburb of Iowa)

Re: It might end up a Theorbo - Randy Roberts

Post by Randy Roberts »

After totally inadequate study, and using totally misconceived ideas, I decided an instrument that is over 6 feet long should have an adjustable neck and that the neck extension should fold in half for travel. It would be nice if it stayed in tune when extended again. So I’ve thrown these wrenches into the pot also, and started prototypes for the neck,
Attachments
neck
neck
neck-1.jpg
Randy Roberts
Posts: 465
Joined: Sat Jan 07, 2012 9:11 pm
Location: Omaha, NE (a suburb of Iowa)

Re: It might end up a Theorbo - Randy Roberts

Post by Randy Roberts »

as well as the neck extension.
Attachments
neck-extension---side.jpg
neck-extension-1.jpg
Randy Roberts
Posts: 465
Joined: Sat Jan 07, 2012 9:11 pm
Location: Omaha, NE (a suburb of Iowa)

Re: It might end up a Theorbo - Randy Roberts

Post by Randy Roberts »

When unwelcome house projects interfered with further progress.

I have no misconceptions that this thing is going to get finished during the challenge ( nor in my lifetime), but the challenge should be a nice kick in the butt to try to get a little farther along.
The first step is get my darn shop back.
Attachments
shop.jpg
Steve Black
Posts: 6
Joined: Tue Apr 22, 2014 7:59 am

Re: It might end up a Theorbo - Randy Roberts

Post by Steve Black »

If you made it a little longer, you could add oars and row it...
User avatar
Hans Bezemer
Posts: 373
Joined: Sat May 26, 2012 1:01 am
Location: The Netherlands
Contact:

Re: It might end up a Theorbo - Randy Roberts

Post by Hans Bezemer »

Good start Randy!
Do you plan to use gut-strings or nylon?
What will be the tuning?

Made some progress with the unwelcome house projects?
User avatar
Mike Wilson
Posts: 49
Joined: Thu Jan 12, 2012 11:03 am
Location: Chicago

Re: It might end up a Theorbo - Randy Roberts

Post by Mike Wilson »

A Theorbo! Watching with interest!
Randy Roberts
Posts: 465
Joined: Sat Jan 07, 2012 9:11 pm
Location: Omaha, NE (a suburb of Iowa)

Re: It might end up a Theorbo - Randy Roberts

Post by Randy Roberts »

rough-shaping-mold.jpg
Well, finally got a couple hours to do "real" work and was able to rough shape the butt of the mold with a plane, spokeshaves rasps, and files.

Here's a shot of the tools above
Attachments
close up
close up
User avatar
Neal Carey
Posts: 98
Joined: Fri Jan 06, 2012 8:19 pm
Location: Woburn, Massachusetts
Contact:

Re: It might end up a Theorbo - Randy Roberts

Post by Neal Carey »

That's a really nice looking mold Randy! I'll be very interested to see your rib fitting process and hope you'll be able to have some detailed pics.
"Time you enjoy wasting, was not wasted." - John Lennon
Randy Roberts
Posts: 465
Joined: Sat Jan 07, 2012 9:11 pm
Location: Omaha, NE (a suburb of Iowa)

Re: It might end up a Theorbo - Randy Roberts

Post by Randy Roberts »

Thanks Neal,
It's pretty embarrassing to see how little I've been able to do on this since the last post. Lots of normal life getting in the way this summer.

After 12 years of trying to find what box I put the tool I need at the moment in, I've put the mold on hold while building a tool cabinet to store my most used stuff in one place, and have neglected progress on the theorbo. I'll continue to post progress as it occurs, probably in the "Other Stringed Instruments" threads, as I'm sure not going to finish in the running of this challenge. <g>
Post Reply

Return to “The "Try Something New" Challenge (Closed)”