ES 175 rosewood bridge

Please put your pickup/wiring discussions in the Electronics section; and put discussions about repair issues, including fixing errors in new instruments, in the Repairs section.
Post Reply
Tom Lazouras
Posts: 1
Joined: Tue Apr 27, 2021 2:43 pm

ES 175 rosewood bridge

Post by Tom Lazouras »

I’m in the process of upgrading my Epi ES 175 and am in need of an undrilled rosewood base to accommodate the posts for the Gibson ABR 1 historic tom. I’ve tried online resources but all bases are predrilled and diameters larger than Gibson posts, as is my Epi rosewood base. Any suggestions appreciated...
User avatar
Barry Daniels
Posts: 3186
Joined: Thu Jan 05, 2012 10:58 am
Location: The Woodlands, Texas

Re: ES 175 rosewood bridge

Post by Barry Daniels »

Get one of the available bridges, plug it with a hardwood dowel, then re-drill and thread to the size you need.
MIMF Staff
Alan Carruth
Posts: 1265
Joined: Sun Jan 15, 2012 1:11 pm

Re: ES 175 rosewood bridge

Post by Alan Carruth »

When you fit the bridge to the top, try to get it set at a slight back angle, so that the line of the bridge posts bisects the break angle. This will minimize the tipping force on the top of the bridge, and help keep those small diameter posts from working loose.
Post Reply

Return to “Archtop Guitars and Bass Guitars”