Practice Wood - Archtop Tops and Backs

Please put your pickup/wiring discussions in the Electronics section; and put discussions about repair issues, including fixing errors in new instruments, in the Repairs section.
Post Reply
Nelson Brown
Posts: 2
Joined: Sun Jul 23, 2017 10:22 pm

Practice Wood - Archtop Tops and Backs

Post by Nelson Brown »

I'm going to make my first attempt at carving an archtop pretty soon. I don't want to risk my good billets on a process I haven't been through before. I'd rather try to make an archtop out of budget wood first, just to go through all of the steps once before I commit more expensive resources to the project. Necks, sides, and fingerboards are no problem. However, billets large enough to use for tops and backs are a little hard to come by. What is the most economical material that you would recommend for this purpose?

User avatar
Bob Gramann
Posts: 973
Joined: Fri Jan 06, 2012 11:08 am
Location: Fredericksburg, VA
Contact:

Re: Practice Wood - Archtop Tops and Backs

Post by Bob Gramann »

How about a spruce 2x8 or 2x10? Although it won’t be quartersawn, you can pick though the pile and find one with two 21” knot free sections.

Nelson Brown
Posts: 2
Joined: Sun Jul 23, 2017 10:22 pm

Re: Practice Wood - Archtop Tops and Backs

Post by Nelson Brown »

Yeah, it looks like a 2x10 would be sufficinet in actual dimensions, and it looks like my local hardware store stocks it. I might be able to get a pair of tops out of a 2x10x10. And maybe I can cobble together enough 5/4 - 6/4 maple for a 3 piece back. That ought to work.

Alan Carruth
Posts: 1005
Joined: Sun Jan 15, 2012 1:11 pm

Re: Practice Wood - Archtop Tops and Backs

Post by Alan Carruth »

If there's a hardwood place nearby you might be able to get a wide board of poplar or birch for a back. If you have a bandsaw you can re-saw a 6/4 board 8" or 10" wide and get a book match. These, and especially the poplar, would be fairly easy to carve, and can actually make a nice instrument if they turn out well enough. There are lots of birch Gibsons out there, and Strad used poplar for violas and 'cellos.

Brian Evans
Posts: 897
Joined: Sat Aug 30, 2014 8:26 am
Location: Tatamagouche, Nova Scotia

Re: Practice Wood - Archtop Tops and Backs

Post by Brian Evans »

I start with 1" thick boards, so resawing a 6/4 board is a non-starter. My first archtop was a 2X8 of fine grained fully quartersawn cedar from Home Depot, in their decking pile. It's not book-matched, and it's a four piece top, but I think it came out great. What I would do is buy utility grade pieces from a place like https://www.woodtoworks.com/Engelmann-S ... 27918.html they have inexpensive tops and backs from time to time if you pick through their offerings.

Post Reply