Carving plates - first music

Please put your pickup/wiring discussions in the Electronics section; and put discussions about repair issues, including fixing errors in new instruments, in the Repairs section.

Carving plates - first music

Postby Brian Evans » Sun Jan 07, 2018 10:23 am

Carving plates is the essence of making archtop guitars. You start with that 1" thick heavy chunk of hardwood or that oddly light chunk of softwood, and you work and work to get it into a rough shape. Then you turn it over and work and work to get the inside to start to match the outside. Then you start to get close, and kind of transition from rough carving to graduating. Then you get it close and start to tap it to see what you have wrought. For me, that first tapping and the beautiful rich drum sound you get when the plates are really close is just magical - it's the first music that guitar creates. I'm building two guitars this winter and I got to hear four new plates for the first time yesterday. A lot of work but a lot of pleasure.

Brian Evans
Posts: 861
Joined: Sat Aug 30, 2014 8:26 am
Location: Tatamagouche, Nova Scotia

Return to Archtop Guitars and Bass Guitars

Who is online

Users browsing this forum: No registered users and 1 guest

Your purchase from these sites helps support the MIMForum, but only if you start at the links below!!!
Amazon music     Amazon books     Amazon tools     Rockler tools     Office Depot    

The MIMF is a member-supported forum, please consider supporting us with a donation, thanks!
 • Book store • Tool store • Links •