4 string headless bass piezzo/midi bridge

Please put your pickup/wiring discussions in the Electronics section; and put discussions about repair issues, including "disappearing" errors in new instruments, in the Repairs section.
Post Reply
Cédric Verglas
Posts: 2
Joined: Mon Jan 16, 2012 6:45 am
Contact:

4 string headless bass piezzo/midi bridge

Post by Cédric Verglas »

Hi fellows,

I am looking for a source for individual piezzo bridge (for midi capabilities) for a 4 string headless bass I am planing. I've spent some time googling without succes. Do I have to buy standard headless gear and machine the bridge to adapte some RMC pickups (or another brand)?

Thanks,
HarpGuitar maker previously known as Pierre Lamour !

Michael Sankey
Posts: 21
Joined: Wed Jan 11, 2012 9:38 pm
Location: Ottawa, Canada
Contact:

Re: 4 string headless bass piezzo/midi bridge

Post by Michael Sankey »

Graph-tech makes piezo saddles to fit ABM bridges- they also make the hexpander midi interface. I think they also make piezo saddles to fit Hipshot as well. Check them out at the obvious URL.
You can order the bridges with piezo pre-installed directly from ABM. I did that for a guitar with individual bridges recently. They work very well, but if you order direct they build to order, which means you have to wait a while.

Cédric Verglas
Posts: 2
Joined: Mon Jan 16, 2012 6:45 am
Contact:

Re: 4 string headless bass piezzo/midi bridge

Post by Cédric Verglas »

Much thanks Michael, I am not that good googling :D
HarpGuitar maker previously known as Pierre Lamour !

Post Reply