Single-rod dual-action trussrod?

Please put your pickup/wiring discussions in the Electronics section; and put discussions about repair issues, including "disappearing" errors in new instruments, in the Repairs section.
gene downs
Posts: 19
Joined: Thu Sep 20, 2012 1:58 pm

Re: Single-rod dual-action trussrod?

Post by gene downs »

Yes, of course.

But a question: Do you guys do any roughening of the bottom of the fingerboard so the epoxy has something to grab? I made a knife out of a saw blade once that I just epoxied the scales on and one of them fell off after a few months. I didn't really know anything about epoxy at the time. Anyway, that's partly why I'm scared of the stuff now.

User avatar
Mark Swanson
Posts: 1974
Joined: Thu Jan 05, 2012 11:11 am
Location: Grand Rapids, Michigan USA
Contact:

Re: Single-rod dual-action trussrod?

Post by Mark Swanson »

Yes, Gene. See this discussion http://www.mimf.com/phpbb/viewtopic.php ... 59&start=0 and near the end on its second page you'll see Mario show some photos of how he does that.
  • Mark Swanson, guitarist, MIMForum Staff

gene downs
Posts: 19
Joined: Thu Sep 20, 2012 1:58 pm

Re: Single-rod dual-action trussrod?

Post by gene downs »

Thanks, Mark.

Post Reply