$100 local materials challenge, David Frassetto's lapsteel (Completed 4/13/12)

Here is where you put your entries.
User avatar
Mark Swanson
Posts: 1991
Joined: Thu Jan 05, 2012 11:11 am
Location: Grand Rapids, Michigan USA
Contact:

Re: $100 local materials challenge, David Frassetto's lapsteel

Post by Mark Swanson »

That looks real nice! You must be the first one done too.
I watched this with interest, I just built myself a lap steel too- and mine is blue also!
  • Mark Swanson, guitarist, MIMForum Staff
Steve Senseney
Posts: 673
Joined: Fri Jan 06, 2012 2:45 pm

Re: $100 local materials challenge, David Frassetto's lapsteel

Post by Steve Senseney »

Nice work, and quickly done!

Could you show a close up of the acrylic fingerboard?
Tristan Williams
Posts: 100
Joined: Thu Feb 02, 2012 11:10 am
Location: Espoo, Finland

Re: $100 local materials challenge, David Frassetto's lapsteel

Post by Tristan Williams »

Cool! I'm a big fan of the fabric finish. I'd like to do that on a build someday, with some cheesy paisley or something :)
Jason Rodgers
Posts: 1554
Joined: Fri Jan 06, 2012 4:05 pm
Location: Portland, OR

Re: $100 local materials challenge, David Frassetto's lapsteel

Post by Jason Rodgers »

That's super funky! And for around $60 plus time? That's the great stuff this challenge pulls out.
-Ruining perfectly good wood, one day at a time.
User avatar
david frassetto
Posts: 78
Joined: Wed Mar 07, 2012 2:55 pm
Location: Milwaukee WI

Re: $100 local materials challenge, David Frassetto's lapsteel

Post by david frassetto »

Jason,Tristan, Steve, and Mark, Thank you!

The fabric finishing is fun. Heres a tip. when you go to look at fabric take along a cutout of the shape of your body. you can then see how the pattern will look when reduced to its final shape. I've gotten some funny looks from salespeople as I stand there trying out different patterns, but sometimes something that looks great on the bolt doesn't look good when seen body size. Most of the patterens I've used came from the quilting fabric section. The patterns seem to be smaller and meant for a smaller area rather than for a garment.

Also I use a semi gloss polyurethane. I havent tried gloss yet because the fabric leaves a ruogh texture and I don't know how many coats I'd have to build up before I could start to level sand it. And on the lap steel it is a built in anti slip coating an the back.

I can't get any new pics til later but I enlarged some of the others
Attachments
tn_DSCN4637.JPG
tn_DSCN4633.JPG
Lap steel fanatic
User avatar
Eddie McRae
Posts: 153
Joined: Thu Feb 23, 2012 10:07 am
Location: Woodbury, GA USA
Contact:

Re: $100 local materials challenge, David Frassetto's lapsteel

Post by Eddie McRae »

Nice job!
User avatar
Andrew Porter
Posts: 98
Joined: Sun Jan 08, 2012 8:49 am
Location: The Banks of Sleepy Creek, NC, USA

Re: $100 local materials challenge, David Frassetto's lapsteel

Post by Andrew Porter »

Very pretty. I like the Star Trekky Carpet finish. I would guess it would be more stable on your lap

> "After the adhesive dries I give it a good coat of Minwax water based polyurethane."
Did you coat the carpet too?

Edit: Never mind. After re-reading it all makes sense now. Don't know where the Carpet came from. Must have been one of those senior moments.
World's Second Finest Maker of Expensive Sawdust
Thomas Dooher
Posts: 61
Joined: Fri Jan 13, 2012 7:18 pm

Re: $100 local materials challenge, David Frassetto's lapsteel

Post by Thomas Dooher »

wow..I think you are first to cross the finish line, no?
Jason Rodgers
Posts: 1554
Joined: Fri Jan 06, 2012 4:05 pm
Location: Portland, OR

Re: $100 local materials challenge, David Frassetto's lapsteel

Post by Jason Rodgers »

Ellie would dig.
-Ruining perfectly good wood, one day at a time.
User avatar
david frassetto
Posts: 78
Joined: Wed Mar 07, 2012 2:55 pm
Location: Milwaukee WI

Re: $100 local materials challenge, David Frassetto's lapsteel

Post by david frassetto »

Jason, Thomas, Andrew, and Eddie, Thank you !

I wasn't trying to be the first to finish but as I said in the opening post, medical issues are keeping me home so I have too much time on my hands. Hopefully the neuro-opthamologist will clear me to return to work when I see her next week. After all, if I can build a guitar and not injure myself I should be able to run the machines at work!

I think Ellie would dig it too. Must be something in this Wisconsin water, or maybe our dairy air <G>.
Lap steel fanatic
User avatar
Andrew Porter
Posts: 98
Joined: Sun Jan 08, 2012 8:49 am
Location: The Banks of Sleepy Creek, NC, USA

Re: $100 local materials challenge, David Frassetto's lapsteel

Post by Andrew Porter »

David, I missed how you fixed the fingerboard to the guitar.
World's Second Finest Maker of Expensive Sawdust
User avatar
david frassetto
Posts: 78
Joined: Wed Mar 07, 2012 2:55 pm
Location: Milwaukee WI

Re: $100 local materials challenge, David Frassetto's lapsteel

Post by david frassetto »

Andrew, I used #2x1/2 screws. These are the same size as the screws that are used on most tuning machines. I got them from my local guitar shop.
Lap steel fanatic
User avatar
Andrew Porter
Posts: 98
Joined: Sun Jan 08, 2012 8:49 am
Location: The Banks of Sleepy Creek, NC, USA

Re: $100 local materials challenge, David Frassetto's lapsteel

Post by Andrew Porter »

Thanks. Have you been playing it?
World's Second Finest Maker of Expensive Sawdust
User avatar
david frassetto
Posts: 78
Joined: Wed Mar 07, 2012 2:55 pm
Location: Milwaukee WI

Re: $100 local materials challenge, David Frassetto's lapsteel

Post by david frassetto »

Quite a lot. The pickup is from one of those Tokai lawsuit guitars from the late 70's that I bought used a long time ago. It is 5.7k ohms and sounds real nice. The steel has a nice bark when pushed hard and cleans up nicely when you dial the volume down a little. The hollow body gives it a midrangey honk without too much of the ice pick in the ear high end that some steels have. All in all I'm very happy with the results.
Lap steel fanatic
Post Reply

Return to “The Local Materials Challenge (Closed)”