conversion varnish

TEST ON SCRAP FIRST! If your question is about repair work, either regluing or refinishing, please post it in our Repair Section.
Post Reply
User avatar
Sandy Winters
Posts: 13
Joined: Sat Jan 07, 2012 7:11 pm
Location: Southern Wisconsin
Contact:

conversion varnish

Post by Sandy Winters »

Has anyone used conversion varnish for finishing acoustic guitars? I've used it for many years with good results on solid body electrics. I'm wondering about acoustic properties compared to polyurethane, nitro, shellac. Thanks
User avatar
Barry Daniels
Posts: 3186
Joined: Thu Jan 05, 2012 10:58 am
Location: The Woodlands, Texas

Re: conversion varnish

Post by Barry Daniels »

Hi Sandy. There is no need to post duplicate questions in other areas of the forum. This one will get seen by everyone here. I deleted the other post. Thank you.

What brand of conversion varnish do you use?
MIMF Staff
User avatar
Sandy Winters
Posts: 13
Joined: Sat Jan 07, 2012 7:11 pm
Location: Southern Wisconsin
Contact:

Re: conversion varnish

Post by Sandy Winters »

Sorry. I posted the first thread before I realized there was a 'Glues and Finishes" section.

I have used Sherwin Williams conversion varnish for about 30 years.
Post Reply

Return to “Glues and Finishes”