touching up poly finishes

TEST ON SCRAP FIRST! If your question is about repair work, either regluing or refinishing, please post it in our Repair Section.
Post Reply
Greg Martin
Posts: 308
Joined: Thu Feb 23, 2012 7:18 pm

touching up poly finishes

Post by Greg Martin »

I have a black Greco from 78 that needs touch up to the top,more than drop fill and less than a full respray. I believe the finish is a poly of sort, will either of these adhere generally speaking, nitro lacquer or Crystallac waterbased. Id need a black then a clear. any tips or suggestions will help

Barry Daniels
Posts: 2440
Joined: Thu Jan 05, 2012 10:58 am
Location: The Woodlands, Texas

Re: touching up poly finishes

Post by Barry Daniels »

CA is the best thing for this. I use Glu Boost which also has tints for coloring. They do have a black tint.
MIMF Staff

Post Reply