Page 1 of 1
Lining Clamps
Posted: Thu Apr 22, 2021 2:49 pm
by Bob Gramann
I have been looking for alternatives to clothespins for clamping linings since I built my first guitar many years ago. I came across these at Home Depot yesterday. They have a good, strong clamping force. At .48 a piece, that’s $48 for a guitar-sized set of 100—much cheaper than many of the alternatives with less clamping force. Just sharing my good fortune. Enjoy.
Re: Lining Clamps
Posted: Fri Apr 23, 2021 8:53 am
by Bryan Bear
I use clothes pins with rubber bands wrapped around them to get more clamping force. The dollar store supplied enough of each for a couple bucks. It would sure be nifty to have 100 of those metal ones though.
Re: Lining Clamps
Posted: Fri Apr 23, 2021 8:35 pm
by Darrel Friesen
I'm a lot slower. I have about 30 of those metal ones and do a section or two at a time between side braces. Sauntering along without production in mind.
Re: Lining Clamps
Posted: Sat Apr 24, 2021 4:23 pm
by Carl Dickinson
I've been using the small plastic clamps from HF for this. They make that process very colorful I also use them for clamping the purfling to binding before bending. They come in two sizes. I mostly use the small ones but the bigger ones are useful when you need a little more pressure. They're cheap too. But when they occasionally break, I save the parts to fix them.
He's some pics.