Lining Clamps

Questions about tools and jigs you want to buy/build/modify.
Post Reply
User avatar
Bob Gramann
Posts: 997
Joined: Fri Jan 06, 2012 11:08 am
Location: Fredericksburg, VA
Contact:

Lining Clamps

Post by Bob Gramann »

I have been looking for alternatives to clothespins for clamping linings since I built my first guitar many years ago. I came across these at Home Depot yesterday. They have a good, strong clamping force. At .48 a piece, that’s $48 for a guitar-sized set of 100—much cheaper than many of the alternatives with less clamping force. Just sharing my good fortune. Enjoy.
0D6C82A6-42F3-48C0-98C4-7EA88BD5A981.jpeg
BB4F8662-FD7A-4FE2-BDCC-9F36D4934C10.jpeg

User avatar
Bryan Bear
Posts: 1283
Joined: Fri Jan 06, 2012 1:05 pm
Location: St. Louis, MO

Re: Lining Clamps

Post by Bryan Bear »

I use clothes pins with rubber bands wrapped around them to get more clamping force. The dollar store supplied enough of each for a couple bucks. It would sure be nifty to have 100 of those metal ones though.
PMoMC

Take care of your feet and your feet will take care of you.

Darrel Friesen
Posts: 225
Joined: Fri Jan 06, 2012 5:48 pm

Re: Lining Clamps

Post by Darrel Friesen »

I'm a lot slower. I have about 30 of those metal ones and do a section or two at a time between side braces. Sauntering along without production in mind. :)

Carl Dickinson
Posts: 73
Joined: Fri Feb 08, 2019 5:38 pm
Location: Forest Ranch, California

Re: Lining Clamps

Post by Carl Dickinson »

I've been using the small plastic clamps from HF for this. They make that process very colorful I also use them for clamping the purfling to binding before bending. They come in two sizes. I mostly use the small ones but the bigger ones are useful when you need a little more pressure. They're cheap too. But when they occasionally break, I save the parts to fix them.
He's some pics.
PB262299.JPG
PB262310.JPG
IMG_20201109_162120_9.jpg

Post Reply