Spalted Poplar

Ask your wood and other materials questions here. Please DO NOT post pictures and ask us to identify your wood, we have found that accurate ID is nearly impossible, and such discussions will be deleted. Thanks.
Post Reply
Thomas Yerkey
Posts: 8
Joined: Thu Apr 14, 2016 11:32 am
Location: Axtel, Kentucky

Spalted Poplar

Post by Thomas Yerkey »

Hi All,

I just acquired a bunch of beautifully spalted poplar. It is very firm and very consistently spalted. Does anyone have any experience working with poplar or spalted poplar in an acoustic guitar? I am currently building my first attempt at an acoustic guitar out of black walnut. I know it will be strong enough and stable enough. The idea of using the spalted poplar is very interesting to me. Please assault me with opinions and ideas...
Brian Evans
Posts: 922
Joined: Sat Aug 30, 2014 8:26 am
Location: Tatamagouche, Nova Scotia

Re: Spalted Poplar

Post by Brian Evans »

Are you looking at back and sides? How is it sawn? If it's really pretty it might make a nice solid-body blank, but it's considered dull and lifeless as an acoustic back and side wood, it's very soft and not all that strong so it is/was used only in cheapest of student guitars as neck wood back in the 1950's.

Brian
Last edited by Brian Evans on Thu Apr 14, 2016 12:55 pm, edited 1 time in total.
David King
Posts: 2690
Joined: Sat Jan 07, 2012 10:01 pm
Location: Portland, OR
Contact:

Re: Spalted Poplar

Post by David King »

It might work for a flamenco guitar or laminated to a tougher wood like sapele that's easily available in veneer sheets.
Thomas Yerkey
Posts: 8
Joined: Thu Apr 14, 2016 11:32 am
Location: Axtel, Kentucky

Re: Spalted Poplar

Post by Thomas Yerkey »

I will be building a solid body electric with some of it. It is the acoustic back and sides idea that I wanted feedback on.
Eric Baack
Posts: 640
Joined: Thu Dec 27, 2012 4:28 pm

Re: Spalted Poplar

Post by Eric Baack »

I would worry about how it would bend. I would probably laminate it onto something a lot nicer.
Brian Evans
Posts: 922
Joined: Sat Aug 30, 2014 8:26 am
Location: Tatamagouche, Nova Scotia

Re: Spalted Poplar

Post by Brian Evans »

Well, you can resaw some thin and see how it does. One thing is that poplar is a kind of soft hardwood, and spalting is basically fungus starting to rot the wood, so you may lose some strength and density.
Clay Schaeffer
Posts: 1674
Joined: Fri Jan 06, 2012 12:04 pm

Re: Spalted Poplar

Post by Clay Schaeffer »

Tulip Poplar (liriodendron tulipifera) can make a fine acoustic guitar. Oscar Schmidt used the wood for back and side material on some of their instruments. Todd Cambio of Fraulini guitars has built some instruments with it and you can find his thoughts on it on his website.
Tulip poplar doesn't work that much differently than walnut and is often stained to resemble it.
User avatar
Bryan Bear
Posts: 1375
Joined: Fri Jan 06, 2012 1:05 pm
Location: St. Louis, MO

Re: Spalted Poplar

Post by Bryan Bear »

Wood for backs and sides should be perfectly quarter saw and ring like a bell when you tap it. This is a must, unless it it pretty. If it is pretty, it will make a good guitar even if it taps like wet cardboard.
PMoMC

Take care of your feet and your feet will take care of you.
User avatar
Barry Daniels
Posts: 3186
Joined: Thu Jan 05, 2012 10:58 am
Location: The Woodlands, Texas

Re: Spalted Poplar

Post by Barry Daniels »

Hey folks, he's building an electric. I think it should be fine for a solid body.
MIMF Staff
Jason Rodgers
Posts: 1554
Joined: Fri Jan 06, 2012 4:05 pm
Location: Portland, OR

Re: Spalted Poplar

Post by Jason Rodgers »

Can you post a picture? I really like the green with purple streaks, but with spalting too sounds cool.
-Ruining perfectly good wood, one day at a time.
Clay Schaeffer
Posts: 1674
Joined: Fri Jan 06, 2012 12:04 pm

Re: Spalted Poplar

Post by Clay Schaeffer »

" It is the acoustic back and sides idea that I wanted feedback on."

Yes, he is building an electric, but also this.

"If it is pretty, it will make a good guitar even if it taps like wet cardboard."

I am convinced wet cardboard tap tones can make a nice sounding guitar, if it's only the back and sides that tap like that.
Thomas Yerkey
Posts: 8
Joined: Thu Apr 14, 2016 11:32 am
Location: Axtel, Kentucky

Re: Spalted Poplar

Post by Thomas Yerkey »

Thanks Everyone! It's good to know that purdy trumps tap tone. I will post pics when I can get the things off of my eye phone and onto my computer. I am only on my first acoustic. As I said earlier, I have quarter sawn black walnut for that project. I snagged trailer full of walnut that was cut 30 years ago and stored right. A certain proportion of it is quarter sawn. If I told you what I paid for it, you'd send assassins... The poplar idea comes out of snagging a bunch of it for 50 cents a board foot. I realize that there were a lot of cheap guitars built with poplar way-back. I have to wonder if the cheap extended to building techniques and overall construction quality. My guess is that it did. So, what I will probably do is re-saw some of this stuff, plane it to thickness, and see how it bends. If it stands up to the bending process, maybe I'll try a build with it. If I do a bolt on or pinned tenon neck joint, I could at least salvage some of my work if the thing sucks or fall apart. If it works, it would be a visually striking axe.
User avatar
Bryan Bear
Posts: 1375
Joined: Fri Jan 06, 2012 1:05 pm
Location: St. Louis, MO

Re: Spalted Poplar

Post by Bryan Bear »

Clay Schaeffer wrote:" It is the acoustic back and sides idea that I wanted feedback on."

Yes, he is building an electric, but also this.

"If it is pretty, it will make a good guitar even if it taps like wet cardboard."

I am convinced wet cardboard tap tones can make a nice sounding guitar, if it's only the back and sides that tap like that.
Oops, yes. My tongue-in-cheek comment was meant to apply to back and side woods not tops. Thanks for clarifying. While I'm sure that some back and side woods may be "better" (however an individual maker might define that), I have not made enough instruments to achieve those possible benefits. Focusing on good construction and getting the top and braces sorted out is much more important for me than starting with old growth Brazilian back and sides. . .

Robbie O'Brien recently posted a video of a classical he made using cardboard for the back and sides. Sounded better than any classical I would make.
PMoMC

Take care of your feet and your feet will take care of you.
David King
Posts: 2690
Joined: Sat Jan 07, 2012 10:01 pm
Location: Portland, OR
Contact:

Re: Spalted Poplar

Post by David King »

There are so many varieties of poplar that I would think the wide range of stiffness and strength would have an impact on any instrument. I know that European "Lombardi" poplar makes it's way into the backs of some larger violin family instruments. I don't know about the sides. I have cello sized Lombardi back that someone gave me long ago I could do a tap test on.
Post Reply

Return to “Wood and Materials Q&A”