LMI wood

Diy Tele style Brass bridge plate

Ask your wood and other materials questions here. Please DO NOT post pictures and ask us to identify your wood, we have found that accurate ID is nearly impossible, and such discussions will be deleted. Thanks.

Diy Tele style Brass bridge plate

Postby Jedi Clampett » Wed Jul 01, 2015 9:19 pm

I am thinking of trying to make my own tele style brass bridge plate. I am hoping not to reinvent the wheel.
I would use a traditional tele bridge as a template, but think that I get thick plate and then machine it down with a router or drill press to get the back of the bridge that will drill holes for the saddles.

I am guessing I would anneal the brass first
then drill the holes for the bridge plate
then machine the thickness so that the back part is full thickness and the thinner part is machined down.
Then temper the brass if possible, I could talk to some traditional blacksmiths about this.

Of course many of you may have experience.
Jedi Clampett
 
Posts: 164
Joined: Thu Nov 21, 2013 12:55 am

Re: Diy Tele style Brass bridge plate

Postby Michael Lewis » Fri Jul 03, 2015 3:23 am

I'm not an electric guitar guy mostly, but isn't the original Tele bridge made from sheet/plate material? Brass is easily available and fairly easy to work. If you have the equipment and requisite skills machining from billet can be a sturdy way to go, but bending the part from brass sheet or plate uses much less material and probably would take much less time to make.

I have made several types of tailpieces for mandolins and archtop guitars so I have some experience working brass. I would first anneal the area to be bent, and after the bend I would continue to hammer it a bit to work harden it. If you are machining out of billet just do it without any annealing, as you would need the strength after the part is made and I don't know how you would work harden a machined billet part. Both brass and aluminum can be worked with tool steel or High Speed Steel and a bit of lube. Sharpen your cutter(s).
Michael Lewis
 
Posts: 1446
Joined: Thu Jan 12, 2012 1:22 am
Location: Northern California USA


Return to Wood and Materials Q&A

Who is online

Users browsing this forum: No registered users and 2 guests

Your purchase from these sites helps support the MIMForum, but only if you start at the links below!!!
Amazon music     Amazon books     Amazon tools     Rockler tools     Office Depot    

The MIMF is a member-supported forum, please consider supporting us with a donation, thanks!
 • Book store • Tool store • Links •