MIMF

That's a great looking guitar Eric. A couple more and you'll be carrying the torch!

I have a traditional bench with a Tucker vise which is fantastic and a Veritas twin screw on one end. It's great for both traditional and guitar building but definitely not necessary for just guitars. I built an L shaped one (4' x 4' and 24" depth) based on input from Alan Carruth and others an...

Nice!

Recovery and fixing mistakes is the mark of a good builder Beate!

I agree that what most of what we call vinegar (household) is weak. Acetic acid in industrial strength will peel paint off steel very quickly. The canning vinegar you can buy is usually somewhat stronger than household white vinegar. I've often read about using it for ebonizing higher tannin woods b...

I haven't tried the cross dowel attachment yet Alan as hanger bolts have worked so well for me. Even my old Stewmac 000 plan shows hanger bolts. Combined with furniture assembly nuts, they are likely somewhat lighter than using cross dowel nuts and headed bolts.

Call me crazy but after doing my first few guitars using dovetails, I started doing bolt ons. Way easier for this, resets etc. YMMV of course but dovetails are declining IMHO. There's no magic sound gain or difference.

I had to resort to a carving disc and abrasive sanding on a quilt maple archtop after having tried every weapon in my arsenal. Good luck.

Good advice Barry. I have an almost survivor that I'll use that treatment on.

000 bracing with nothing other than a little wider and taller.

Looks great Teresa. Ukuleles punch way above their weight!

I built this 000 12 string about 15 years ago with advice from Alan Carruth and others. Cedar top was 10 thou or so thicker than a 6 string and braces a little wider and taller as well. Cedar top and mahogany back and sides. Still doing well and sounds great according to my sister! https://i.imgur.c...

I feather mine to nothing on the ends similar to some Martins. Probably because I'm lazy, but works well for me and saves notching.

Ha! So much to do and so little time.

Looks great. Not sure what went wrong for you but glued butt joints on ukuleles are pretty common with some pretty big builders.

That's one of the reasons I've not jumped in feet first on carbon fiber.

Great work Eric. There's more than one way to skin a cat.

Looks good. I made a similar one but added hardened drill guides bought from LeeValley if I recall.

Welding is possible if the right skilled guy is doing it. Brazing is easier for those not so skilled. JB weld works but is much less elegant and likely won't have the longevity.

That's some good looking wood Dale.