Search found 965 matches

by Steve Sawyer
Mon Nov 20, 2023 3:48 pm
Forum: Flat-Top Acoustic Guitars and Bass Guitars
Topic: Almost consistently bad glue joints...
Replies: 36
Views: 44126

Re: Almost consistently bad glue joints...

Alan Carruth wrote: Mon Nov 20, 2023 12:31 pm I have used fish glue for binding for a long time, with no problems so far. I'm just not sure I trust it for something structural.
We’ll see. I also used it to set the neck on my Lester. Will be sure to report any issues that arise!
by Steve Sawyer
Sun Nov 19, 2023 11:18 pm
Forum: Solid-Body and Chambered or Semi-Solid Electric Guitars and Bass Guitars
Topic: Getting back to it - Questions re...a fretless bass??
Replies: 12
Views: 10101

Re: Getting back to it - Questions re...a fretless bass??

I don't think anything is different except, of course, the strings get lowered by the height of the frets. Also, you can set the action pretty low because fret buzz is no longer a concern. Are you going to use flat wound strings? Sorry to be so late getting back to this. Missed it when first posted...
by Steve Sawyer
Sun Nov 19, 2023 11:14 pm
Forum: Flat-Top Acoustic Guitars and Bass Guitars
Topic: Almost consistently bad glue joints...
Replies: 36
Views: 44126

Re: Almost consistently bad glue joints...

On the other hand, I've seen reports on line of failures in fish glue joints under prolonged high humidity and warm temperatures. That mirrors the sorts of problems I had with liquid hide glue in the past, which lead to my dropping the use of that. Hopefully that won't be an issue for me. SE Michig...
by Steve Sawyer
Mon Feb 06, 2023 5:27 pm
Forum: Solid-Body and Chambered or Semi-Solid Electric Guitars and Bass Guitars
Topic: Getting back to it - Questions re...a fretless bass??
Replies: 12
Views: 10101

Re: Getting back to it - Questions re...a fretless bass??

Still haven't started this project, but I have a set of MIMF plans and an ebony fingerboard. I also have some body blanks in the shop Still trying to decide whether to do a 4- or 5-string, but since I'm getting ready to pull the trigger on the bridge, it's decision time. Any special considerations f...
by Steve Sawyer
Sun Oct 09, 2022 10:29 pm
Forum: Solid-Body and Chambered or Semi-Solid Electric Guitars and Bass Guitars
Topic: Getting back to it - Questions re...a fretless bass??
Replies: 12
Views: 10101

Re: Getting back to it - Questions re...a fretless bass??

Thanks. I'm not certain of my abilities enough to go without some kind of "training wheels" to get the intonation right. :D Maybe some half- or quarter-"fret-fillers" that extend to the upper FB edge which would be both decorative and functional. Not sure if I'll bind the neck ed...
by Steve Sawyer
Sat Oct 08, 2022 5:55 pm
Forum: Solid-Body and Chambered or Semi-Solid Electric Guitars and Bass Guitars
Topic: Getting back to it - Questions re...a fretless bass??
Replies: 12
Views: 10101

Getting back to it - Questions re...a fretless bass??

Hey all... It's been a while since I was on here. I've been spending an inordinate amount of time making music instead of instruments. Amazing to discover what my capabilities are now that I'm retired and have the time to practice! Plus I started playing drums almost three years ago, then acquired t...
by Steve Sawyer
Sat Oct 08, 2022 5:42 pm
Forum: Solid-Body and Chambered or Semi-Solid Electric Guitars and Bass Guitars
Topic: finishing a electric guitar
Replies: 28
Views: 41169

Re: finishing a electric guitar

Steve, what filler, sealer, top coat did you use on the mahogany guitar? The grain on the back is amazing. Thank you. Just logged in here for the first time in a long time and realized this hadn't been answered. If you're still "listening," Mike, it was a very simple schedule. Three coats...
by Steve Sawyer
Sun Mar 06, 2022 5:38 pm
Forum: Solid-Body and Chambered or Semi-Solid Electric Guitars and Bass Guitars
Topic: finishing a electric guitar
Replies: 28
Views: 41169

Re: finishing a electric guitar

I'm also going to endorse Brite Tone. I've finished three guitars. One in nitro, one in Tru-Oil, and one in Brite Tone. Brite Tone wins hands-down. One of the amazing things about it is the ability to lay down many many coats before leveling. I didn't touch the finish on this until I had 10 coats, a...
by Steve Sawyer
Mon Aug 30, 2021 8:27 pm
Forum: Jam Session
Topic: Ready for a new challenge
Replies: 19
Views: 22782

Re: Ready for a new challenge

Carl Dickinson wrote: Mon Aug 30, 2021 1:40 pm Check out the forums on talkbass.com. Lots of info there.
Thanks!
by Steve Sawyer
Mon Aug 30, 2021 12:16 pm
Forum: Jam Session
Topic: Ready for a new challenge
Replies: 19
Views: 22782

Re: Ready for a new challenge

Interesting suggestions.

Something I saw on Saturday looked interesting. Tony Levin (with King Crimson) was playing a solid-body electric upright bass. A quick web search turned up very little info on building one though.
by Steve Sawyer
Thu Aug 26, 2021 12:44 pm
Forum: Jam Session
Topic: Ready for a new challenge
Replies: 19
Views: 22782

Re: Ready for a new challenge

Thanks, Matthew. I'd like to take a look at that.

I'm not familiar with Clay's travel guitar.
by Steve Sawyer
Tue Aug 17, 2021 6:02 pm
Forum: Jam Session
Topic: Ready for a new challenge
Replies: 19
Views: 22782

Re: Ready for a new challenge

That said, build yourself a baritone? A baritone guitar? I dunno. I already have a Squier bass VI, and built a 4-string short-scale last year (now my go-to bass). If I were to tackle another guitar it’d probably be a 5-string bass or a fretless bass. And once my Stick arrives I’ll have the low-end ...
by Steve Sawyer
Tue Aug 17, 2021 5:44 pm
Forum: Jam Session
Topic: Ready for a new challenge
Replies: 19
Views: 22782

Re: Ready for a new challenge

Heh, heh…

All very cool stuff. But I’m really looking to make something I can PLAY!! :D And no, programming doesn’t qualify as “playing”! :roll: :lol: I did enough programming for a living, and it definitely qualifies as WORK! :)
by Steve Sawyer
Wed Aug 11, 2021 9:08 pm
Forum: Jam Session
Topic: Ready for a new challenge
Replies: 19
Views: 22782

Re: Ready for a new challenge

Jee-sus!! You really know how to tempt a guy, don't ya? :lol:

How cool!! :D
by Steve Sawyer
Sun Aug 08, 2021 5:02 pm
Forum: Jam Session
Topic: Ready for a new challenge
Replies: 19
Views: 22782

Re: Ready for a new challenge

Heh, heh...

Or I could build one of these!! :D

https://youtu.be/IOmFgIxvVzc
by Steve Sawyer
Thu Aug 05, 2021 9:56 pm
Forum: Jam Session
Topic: Ready for a new challenge
Replies: 19
Views: 22782

Re: Ready for a new challenge

Barry Daniels wrote: Thu Aug 05, 2021 9:45 pm The problem is keeping them in tune.
I can imagine - like a piano with a frame made out of wood!! :lol: :roll:
by Steve Sawyer
Thu Aug 05, 2021 9:23 pm
Forum: Jam Session
Topic: Ready for a new challenge
Replies: 19
Views: 22782

Re: Ready for a new challenge

Good point, Barry. If I were to build really nice acoustic guitar it might inspire me to do more with it. A hurdy gurdy is one thing I've thought of. Very cool instrument, and seems pretty accessible for the novice. Another is a hammered dulcimer. I've always loved the sound of the hammered dulcimer...
by Steve Sawyer
Thu Aug 05, 2021 6:49 pm
Forum: Jam Session
Topic: Ready for a new challenge
Replies: 19
Views: 22782

Ready for a new challenge

Hey all - haven't been around much in the last year. I've been spending more time learning music than building instruments. I started taking drum lessons about 18 months ago, have been studying a lot of theory, playing the new short-scale bass I finished during the early Covid lock-down, attended a ...
by Steve Sawyer
Thu Feb 11, 2021 10:35 am
Forum: Tools and Jigs
Topic: Offcut storage
Replies: 6
Views: 10703

Re: Offcut storage

An offcut challenge would be fun -might be a lot of "pickin' sticks" though...

I worked with someone whose husband had a high-end cabinet shop that made extensive use of exotic species. I tried to make arrangements to dig through their scrap bin, but without success!
by Steve Sawyer
Wed Feb 10, 2021 3:54 pm
Forum: Solid-Body and Chambered or Semi-Solid Electric Guitars and Bass Guitars
Topic: finishing a electric guitar
Replies: 28
Views: 41169

Re: finishing a electric guitar

Keep in mind that a satin neck will not stay satin. Constant handling will polish it to a high gloss over time. I have a 30-year old Strat that started out satin, but you’d never guess that now! :)

Go to advanced search