"Relic-ing" a Finish: Opinion Only

TEST ON SCRAP FIRST! If your question is about repair work, either regluing or refinishing, please post it in our Repair Section.

"Relic-ing" a Finish: Opinion Only

Postby Alan Peterson » Thu Feb 08, 2018 10:42 am

In poking around the web, I'm seeing a lot more finished guitars than I did before that are being called "Relic'ed". Some are believable, some are just over the top.

Call it opinion only, but when badly done and most of the finish is missing, all I can think of is, "Man, what kind of lacquer are you using? That stuff is just peeling right off."
Alan Peterson
Name in Anagram Form: "Resonant Peal"
User avatar
Alan Peterson
Posts: 114
Joined: Sat Jan 07, 2012 5:32 pm
Location: Washington DC USA

Re: "Relic-ing" a Finish: Opinion Only

Postby Brian Evans » Thu Feb 08, 2018 1:44 pm

I'm of two minds. On the one hand, I find relicing a brand new instrument very fake - like making a brand new antique table by letting your kid trace drawings with a ball point pen on it, or wacking it with a chain. On the other hand, I am actually intimidated by a brand new perfect, very expensive guitar to the point where I shy away from them. I very much like the look and feel of a typical 50 year old instrument that's been played and loved. Exactly what relic's try to emulate. Weird. If you buy a heavy relic Stratocaster from the Fender Custom Shop for $everal grand, do you then keep it in the case and baby it so it stays pristinely relic'd?

Brian Evans
Posts: 572
Joined: Sat Aug 30, 2014 8:26 am
Location: Tatamagouche, Nova Scotia

Re: "Relic-ing" a Finish: Opinion Only

Postby Bob Orr » Thu Feb 08, 2018 3:46 pm

I have never really got the relic thing."Fake News" as far as I am concerned.
Bob Orr
Posts: 72
Joined: Fri Dec 28, 2012 1:20 pm
Location: Nailsea, Nr Bristol, UK

Re: "Relic-ing" a Finish: Opinion Only

Postby Peter Wilcox » Fri Feb 09, 2018 2:27 am

One of the first guitars I made was a SRV #1 copy. I thought I'd relic it by dragging it with my tractor over the sagebrush, rabbit brush, antelope bitterbrush and rocks outside my shop. But I didn't. :D
Maybe I can't fix it, but I can fix it so no one can fix it
User avatar
Peter Wilcox
Posts: 900
Joined: Sun Jan 08, 2012 1:31 am
Location: Northeastern California

Re: "Relic-ing" a Finish: Opinion Only

Postby Aaron Helt » Fri Feb 09, 2018 10:16 am

If done right, I think it looks cool.
Aaron Helt
Posts: 53
Joined: Thu May 10, 2012 9:19 am

Re: "Relic-ing" a Finish: Opinion Only

Postby Dan Smith » Fri Feb 09, 2018 11:33 am

The only relic finish I don’t mind looking at is the old barn wood look.
Seeing a bright shiny finish with sanded spots here and there is dumb.
Ever-body was kung fu fight-in,
Them kids was fast as light-nin.
User avatar
Dan Smith
Posts: 306
Joined: Mon May 18, 2015 9:33 pm
Location: Texas

Re: "Relic-ing" a Finish: Opinion Only

Postby Clay Schaeffer » Thu Feb 15, 2018 5:49 pm

It's the unintentional relic'ing I do I don't like! :lol:
Clay Schaeffer
Posts: 1079
Joined: Fri Jan 06, 2012 12:04 pm

Return to Glues and Finishes

Who is online

Users browsing this forum: No registered users and 1 guest

Your purchase from these sites helps support the MIMForum, but only if you start at the links below!!!
Amazon music     Amazon books     Amazon tools     Rockler tools     Office Depot    

The MIMF is a member-supported forum, please consider supporting us with a donation, thanks!
 • Book store • Tool store • Links •