First Build, A mandolin

If it's not a guitar or a bass guitar discussion, and it's got strings, put it here.
Post Reply
Brent Bischoff
Posts: 14
Joined: Fri Apr 22, 2016 12:03 pm
Location: South East Idaho

First Build, A mandolin

Post by Brent Bischoff »

Hello, my name is Brent and I just rejoined this form, was a member a long time ago, anyway I thought I would share my recent build. After years of wanting to build an instrument, I finally accomplished the task.

This is a mandolin that I built from scratch using some drawings I found online and a lot of reading and research on various forums and other places, including the MIMF.

The build process was quite a journey and I learned a lot, including fixing mistakes, repairs etc. let’s see, I drilled the tuner holes wrong and had to remove the head stock overlay and make a new one, fill and re-drill the tuner holes, had to remove the back so that I could steam out the neck and reset it, I ruined the back while removing it and had to make a new one and the list goes on.

Overall I really enjoyed building it and was impressed when I finally got to string it up and it didn’t implode, in fact it actually sounded fairly good. (still need to learn to play it)

Back, sides and neck are cherry, scraps from a friends cabinet shop
Top is hemlock, I found a nice quarter sawn board at the local big box store.
Fretboard is rosewood, pre slotted from Stew Mac along with the hardware.
Fretboard position markers are maple
Bracing is some kind of pine
Finish – Tru-oil

Brent
Brent Bischoff
Posts: 14
Joined: Fri Apr 22, 2016 12:03 pm
Location: South East Idaho

Re: First Build, A mandolin

Post by Brent Bischoff »

here is a picture, will try to get more loaded later.

Brent
IMG_0333.jpg
Brent Bischoff
Posts: 14
Joined: Fri Apr 22, 2016 12:03 pm
Location: South East Idaho

Re: First Build, A mandolin

Post by Brent Bischoff »

one more. I apologize for the quality of the pictures, they are off of my phone.

Brent
IMG_0332.jpg
Mike Conner
Posts: 235
Joined: Wed Feb 08, 2012 8:12 pm
Location: Murphy NC
Contact:

Re: First Build, A mandolin

Post by Mike Conner »

Nice. I like the way you joined the back grain pattern.

You are on the slippery slope to obsessive lutherie now. After some time you will not resist the urge to build again!
User avatar
Bryan Bear
Posts: 1375
Joined: Fri Jan 06, 2012 1:05 pm
Location: St. Louis, MO

Re: First Build, A mandolin

Post by Bryan Bear »

Nicely done! There is nothing quite like stringing up and hearing that first instrument for the first time!
PMoMC

Take care of your feet and your feet will take care of you.
Brent Bischoff
Posts: 14
Joined: Fri Apr 22, 2016 12:03 pm
Location: South East Idaho

Re: First Build, A mandolin

Post by Brent Bischoff »

Mike, I am afraid I have been bitten by the bug!! I just completed my second instrument, a lap dulcimer. The slope is definitely slippery!

Brian, Definitely hearing it for the first time was a quite a feeling!

This is what I started with
IMG_0049 (2).jpg
Top braced, glued and clamped to the rim
IMG_0108.jpg
Carving the neck
IMG_0119.jpg
Gluing the back on
IMG_0253.jpg
Brent Bischoff
Posts: 14
Joined: Fri Apr 22, 2016 12:03 pm
Location: South East Idaho

Re: First Build, A mandolin

Post by Brent Bischoff »

Ready for finish
IMG_0256.jpg
During finishing
IMG_0261.jpg
And one more of it finished.
IMG_0323.jpg
Brent
Bob Francis
Posts: 582
Joined: Wed Jan 11, 2012 6:28 pm

Re: First Build, A mandolin

Post by Bob Francis »

Nice!
Chris Mudd
Posts: 21
Joined: Sun Jul 15, 2012 6:12 pm

Re: First Build, A mandolin

Post by Chris Mudd »

It is beautifully simple, simply beautiful!

Who's plans did you work from?
Brent Bischoff
Posts: 14
Joined: Fri Apr 22, 2016 12:03 pm
Location: South East Idaho

Re: First Build, A mandolin

Post by Brent Bischoff »

Chris, Thank you.

The drawings I used came from a Instructables article called Army-Navy Mandolin on the cheap. Between that article and quite a bit of research I was able to pull it off, however if I were to do another one like this, I would probably buy the plans that are for sale on the "Crystal Forest Mandolins" web site. They look to be very well drawn and the instruments he builds are very nice looking.
User avatar
Jim McConkey
Posts: 1061
Joined: Thu Jan 05, 2012 4:00 pm
Location: Way north of Baltimore, MD

Re: First Build, A mandolin

Post by Jim McConkey »

Welcome back, Brent!

I like the back, too! I did the same thing with an octave mandolin I built a few years back.

What thickness did you make the top? My beater mandolin got rained on in a flood, and the stop split and warped beyond repair, so I have to make a new one.
MIMForum Staff - Way North of Baltimore
Brent Bischoff
Posts: 14
Joined: Fri Apr 22, 2016 12:03 pm
Location: South East Idaho

Re: First Build, A mandolin

Post by Brent Bischoff »

Jim,

Thanks, its good to be back. I don't recall what the final thickness was, I will have to look at my notes tonight when I get home from work. I would like to try an octave mandolin myself someday.
Brent Bischoff
Posts: 14
Joined: Fri Apr 22, 2016 12:03 pm
Location: South East Idaho

Re: First Build, A mandolin

Post by Brent Bischoff »

Jim,

The final thickness was at .120" for the top.
User avatar
Jim McConkey
Posts: 1061
Joined: Thu Jan 05, 2012 4:00 pm
Location: Way north of Baltimore, MD

Re: First Build, A mandolin

Post by Jim McConkey »

Thanks, Brent!
MIMForum Staff - Way North of Baltimore
Post Reply

Return to “Other Stringed Instruments”