StewMac tools

My first commissioned build!

Please put your pickup/wiring discussions in the Electronics section; and put discussions about repair issues, including "disappearing" errors in new instruments, in the Repairs section.

My first commissioned build!

Postby Gerry Beckles » Mon Aug 15, 2016 3:14 pm

This is a bass that I built for my brother - started back in the 3rd quarter of last year but finished this past weekend.

Body: Alder
Neck: Maple, one piece
Fingerboard: round-laminated Indian rosewood
Fingerboard radius: 10"
Pickups: Jerry Sentell B16 single coil (2)
Electronics Mod: DPDT switch to run both pickups in series when the switch is pulled up
Finish: Duplicolor primer, Gracey's Maui Blue lacquer, Minwax Clear Gloss Lacquer
Scale: 34"

The finished product:

Comments are welcome.
Attachments
headback.jpg
headfrontal.jpg
bodytilted.jpg
bodyfront.jpg
headfront.jpg
Gerry Beckles
 
Posts: 16
Joined: Sun Jan 08, 2012 9:58 am

Re: My first commissioned build!

Postby Barry Daniels » Mon Aug 15, 2016 5:42 pm

Looks good. I like the finish.
MIMF Staff
Barry Daniels
 
Posts: 1734
Joined: Thu Jan 05, 2012 10:58 am
Location: Houston, Texas

Re: My first commissioned build!

Postby Gordon Bellerose » Mon Aug 15, 2016 7:03 pm

Congrats on selling a guitar!! Nice color.
I need your help. I can't possibly make all the mistakes myself!
Gordon Bellerose
 
Posts: 945
Joined: Wed May 30, 2012 11:47 pm
Location: Edmonton AB. Canada

Re: My first commissioned build!

Postby Jason Rodgers » Mon Aug 15, 2016 7:52 pm

Yes, sweet paint job!

Can you tell us how you did the laminated fingerboard?
-Ruining perfectly good wood, one day at a time.
Jason Rodgers
 
Posts: 1544
Joined: Fri Jan 06, 2012 4:05 pm
Location: Portland, OR

Re: My first commissioned build!

Postby Peter Wilcox » Mon Aug 15, 2016 8:23 pm

Nice looking bass. Where did you get the pickup and bridge covers?

Oh, and nice shirt! Someone gifted me the same one - "So many guitars, so little time". :)
Maybe I can't fix it, but I can fix it so no one can fix it
User avatar
Peter Wilcox
 
Posts: 880
Joined: Sun Jan 08, 2012 1:31 am
Location: Northeastern California

Re: My first commissioned build!

Postby Steve Sawyer » Mon Aug 15, 2016 11:20 pm

Very pretty. I think the pickup & bridge covers really set off that color. Just started playing bass last September, and I was thinking that pickup cover would make an interesting rest for my hand.
==Steve==
User avatar
Steve Sawyer
 
Posts: 381
Joined: Wed Jan 02, 2013 2:20 pm
Location: Detroit, Michigan

Re: My first commissioned build!

Postby Dan Hehnke » Tue Aug 16, 2016 7:12 pm

Cool! I like the headstock and the color alot.
User avatar
Dan Hehnke
 
Posts: 136
Joined: Wed Feb 15, 2012 12:22 am
Location: Colorado

Re: My first commissioned build!

Postby Gerry Beckles » Mon Aug 22, 2016 11:17 am

Thanks to all for your comments!

Jason - for the laminated fingerboard, I cut a 10" radius on the maple portion of the neck using a router jig. Next, I took two Indian rosewood acoustic guitar sides (from Luthiers Mercantile) and laminated them together, using the radiused neck as a caul. After they were glued together, then I laminated them onto the neck, using Titebond (I used a couple of brads with the heads cut off to keep the fingerboard from sliding during the gluing process). Finally, I trimmed the edges with a Robo-Sander flush trim sander, chucked into my drill press. I would have included some pictures of the process, but my board attachment quota has been reached :( Hopefully, my explanation will suffice, but there are some sites that have some descriptive pictures. For the next bass, I have a fingerboard with the 10" radius on the underside - this eliminates the need to bend the fingerboard (and avoids the possibility of cracking; don't ask me how I know this).

Peter - the pickup and bridge covers came from Guitar Parts Factory (formerly Guitar Parts Resource), although there are plenty of online vendors who supply them. I know many people ditch them and use them for ashtrays (!) but I love them, personally. My daughter bought me the t-shirt on her trip to LA a couple of summers ago.

Dan - yes, that headstock is my favorite, although it isn't original. Those who love the early British-built Vox range will recognize it as belonging to the Vox Symphonic Bass. The color, Maui Blue, was my brother's choice. Easy to apply, but make sure to cover it with lots of clear lacquer to avoid sand-throughs.
Gerry Beckles
 
Posts: 16
Joined: Sun Jan 08, 2012 9:58 am


Return to Solid-Body and Chambered or Semi-Solid Electric Guitars and Bass Guitars

Who is online

Users browsing this forum: No registered users and 2 guests

Your purchase from these sites helps support the MIMForum, but only if you start at the links below!!!
Amazon music     Amazon books     Amazon tools     Rockler tools     Office Depot    

The MIMF is a member-supported forum, please consider supporting us with a donation, thanks!
 • Book store • Tool store • Links •