de gluing question

If you have a string instrument of any kind that needs fixing, a mistake you made in building a new instrument that you need to "disappear," or a question about the ethics of altering an older instrument, ask here. Please note that it will be much easier for us to help you decide on the best repair method if you post some pictures of the problem.

de gluing question

Postby Robert Smallwood » Thu Oct 18, 2018 9:41 pm

Hi.
I have just been entertaining myself removing a fretboard from a neck with heat vinegar and a putty knife...with a view to re-using both.

I've yet to completely clean up the gluing surfaces ready for the next iteration.

Having got all the titebond residue off the surfaces and lightly sanding etc etc do I need to neutralise the vinegar residue with soapy water or baking soda - or anything?

Where's the end point?

(I don't do this a lot) :o)

Thanks,
Rob.
Robert Smallwood
 
Posts: 108
Joined: Sat Jan 07, 2012 7:33 pm
Location: Merimbula NSW Australia

Re: de gluing question

Postby Barry Daniels » Fri Oct 19, 2018 9:58 am

If a lot of the vinegar soaked into the wood then a little baking soda wouldn't hurt and would definitely neutralize the acid. However, you would need to apply it with a little water and make it into a paste.
MIMF Staff
Barry Daniels
 
Posts: 2002
Joined: Thu Jan 05, 2012 10:58 am
Location: The Woodlands, Texas

Re: de gluing question

Postby Paul Breen » Fri Oct 19, 2018 3:27 pm

A word of warning, make sure your putty/ palette knives are stainless steel or you will create Black mineral stains in the wood from the acidic vinegar oxidizing plain steel.
Paul Breen
 
Posts: 50
Joined: Mon Jan 09, 2012 11:39 am

Re: de gluing question

Postby Clay Schaeffer » Fri Nov 09, 2018 7:42 pm

I just wash the vinegar off with plenty of water, towel dry then let finish drying before gluing. That has always worked for me. As mentioned use stainless.
Clay Schaeffer
 
Posts: 1184
Joined: Fri Jan 06, 2012 12:04 pm


Return to String Instrument Repair: Practical and Political Issues

Who is online

Users browsing this forum: No registered users and 1 guest

Your purchase from these sites helps support the MIMForum, but only if you start at the links below!!!
Amazon music     Amazon books     Amazon tools     Rockler tools     Office Depot    

The MIMF is a member-supported forum, please consider supporting us with a donation, thanks!
 • Book store • Tool store • Links •