Keeping fretboard flat with neck reset

If you have a string instrument of any kind that needs fixing, a mistake you made in building a new instrument that you need to "disappear," or a question about the ethics of altering an older instrument, ask here. Please note that it will be much easier for us to help you decide on the best repair method if you post some pictures of the problem.

Keeping fretboard flat with neck reset

Postby Steven Williams » Sat Jan 13, 2018 3:31 am

I have an old (1970) custom made flat top acoustic steel string guitar. It needs a neck reset which I can do myself. My question is: If you have to tilt the neck downwards at the headstock end, how do you deal with the angled gap that will be created under the fretboard extension over the body? I want to keep the fretboard level from end to end but I can't picture how this would be possible. Thanks in advance.

Steve
Steven Williams
 
Posts: 10
Joined: Sun Jan 08, 2012 3:59 am

Re: Keeping fretboard flat with neck reset

Postby Brian Evans » Sat Jan 13, 2018 8:59 am

From what I understand you can either put a wedge under the fretboard, or if the gap is quite small you can just glue the fretboard down to the top and level the fret board and refret.
Brian Evans
 
Posts: 667
Joined: Sat Aug 30, 2014 8:26 am
Location: Tatamagouche, Nova Scotia

Re: Keeping fretboard flat with neck reset

Postby Barry Daniels » Sat Jan 13, 2018 1:09 pm

On many guitars that need a neck reset, the fingerboard extension is a bit of a ski ramp already so pulling the neck back will actually straighten the alignment.
MIMF Staff
Barry Daniels
 
Posts: 1899
Joined: Thu Jan 05, 2012 10:58 am
Location: Houston, Texas


Return to String Instrument Repair: Practical and Political Issues

Who is online

Users browsing this forum: No registered users and 4 guests

Your purchase from these sites helps support the MIMForum, but only if you start at the links below!!!
Amazon music     Amazon books     Amazon tools     Rockler tools     Office Depot    

The MIMF is a member-supported forum, please consider supporting us with a donation, thanks!
 • Book store • Tool store • Links •