Acoustic Bridge Out!!

If you have a string instrument of any kind that needs fixing, a mistake you made in building a new instrument that you need to "disappear," or a question about the ethics of altering an older instrument, ask here. Please note that it will be much easier for us to help you decide on the best repair method if you post some pictures of the problem.

Re: Acoustic Bridge Out!!

Postby Gordon Bellerose » Wed Jun 15, 2016 6:05 pm

Clay Schaeffer wrote:"Firstly, he told me that he wouldn't do this repair on a cheap guitar. He would advise simply spending the money on a new one."

That is something to always keep in mind, and a reason to do the repair in an expedient but effective manner.

Yes. If I was asked to do this for a customer, I may have told them the same.
As it was done for a friend, the charges are minimal.
I need your help. I can't possibly make all the mistakes myself!
Gordon Bellerose
 
Posts: 1079
Joined: Wed May 30, 2012 11:47 pm
Location: Edmonton AB. Canada

Re: Acoustic Bridge Out!!

Postby Gordon Bellerose » Wed Jun 15, 2016 6:10 pm

I now have the new bridge installed, and the guitar is back in the customers hands.
It worked out pretty well. The guitar plays really nicely, and sounds a whole bunch better than before.
I was very careful in fitting the new bridge into the rout, and it went on without a hitch.
I used hide glue.
I need your help. I can't possibly make all the mistakes myself!
Gordon Bellerose
 
Posts: 1079
Joined: Wed May 30, 2012 11:47 pm
Location: Edmonton AB. Canada

Re: Acoustic Bridge Out!!

Postby Clay Schaeffer » Sun Jun 19, 2016 11:10 am

Another fine job well done! I'm sure your friend is happy to have her guitar back in good playing condition. One of the nice things about being amateur luthiers and repairman is that we don't always have to consider the dollars and "sense" when making repairs. While a Pro has to justify the cost of the job, as amateurs we can take as much time as necessary and not count the cost.
Clay Schaeffer
 
Posts: 1163
Joined: Fri Jan 06, 2012 12:04 pm

Re: Acoustic Bridge Out!!

Postby Jim McConkey » Mon Jun 20, 2016 4:37 pm

What Clay said! I have done several of these "uneconomical" repairs, and even though the pay is minimal to nonexistent, the experience is priceless. Amateurs just get different things out of of jobs than the pros, but everyone benefits in the end.
MIMForum Staff - Way North of Baltimore
User avatar
Jim McConkey
 
Posts: 844
Joined: Thu Jan 05, 2012 4:00 pm
Location: Way north of Baltimore, MD

Re: Acoustic Bridge Out!!

Postby Ryan Mazzocco » Mon Jun 20, 2016 10:46 pm

Sometimes (most of the time for me) these repairs on less expensive instruments can be even more challenging because you never really know what methods, materials or glues were used until you start tearing into it. Leads to many surprises and then some clever thinking to get around it.
I practiced neck resets on cheap imports and found some very interesting and difficult neck joints. Then the first time I tried removing the neck off a higher quality instrument it came right off as easy as it could be.
User avatar
Ryan Mazzocco
 
Posts: 529
Joined: Sat Feb 04, 2012 6:01 pm
Location: Joplin, MO

Re: Acoustic Bridge Out!!

Postby Gordon Bellerose » Mon Jun 20, 2016 11:37 pm

Every time I do a repair I learn something.
This time I learned that next time, I may rout the old bridge off, if it gives me as much difficulty as this one.
I also learned that the definition of "Fine Tonewoods" is very liberal. This Washburn had a label in the interior that had those words on it.
I also learned what kind of under-saddle pickup strip to avoid. The strip was way too thick.
I need your help. I can't possibly make all the mistakes myself!
Gordon Bellerose
 
Posts: 1079
Joined: Wed May 30, 2012 11:47 pm
Location: Edmonton AB. Canada

Re: Acoustic Bridge Out!!

Postby Bryan Bear » Tue Jun 21, 2016 10:25 am

Gordon Bellerose wrote:Every time I do a repair I learn something.
This time I learned that next time, I may rout the old bridge off, if it gives me as much difficulty as this one.
I also learned that the definition of "Fine Tonewoods" is very liberal. This Washburn had a label in the interior that had those words on it.
I also learned what kind of under-saddle pickup strip to avoid. The strip was way too thick.


Ha! I think the working definition of "fine" has evolved in recent time. a few decades ago, "fine" was a superlative meant to convey something was of the highest quality or done to the highest degree. More and more, people are using it to mean passable. How was school? It was fine. . . If Ward Cleaver's boss told him he was doing a fine job, he'd be feeling pretty good; If my boss tells me I'm doing a fine job, I might want to start dusting off the resume because I expect the next word to be "but".
PMoMC

Take care of your feet and your feet will take care of you.
User avatar
Bryan Bear
 
Posts: 1013
Joined: Fri Jan 06, 2012 1:05 pm
Location: St. Louis, MO

Previous

Return to String Instrument Repair: Practical and Political Issues

Who is online

Users browsing this forum: No registered users and 3 guests

Your purchase from these sites helps support the MIMForum, but only if you start at the links below!!!
Amazon music     Amazon books     Amazon tools     Rockler tools     Office Depot    

The MIMF is a member-supported forum, please consider supporting us with a donation, thanks!
 • Book store • Tool store • Links •