Banjo resonator flange

If it's not a guitar or a bass guitar discussion, and it's got strings, put it here.
Post Reply
Pete Czaja
Posts: 2
Joined: Thu Apr 19, 2018 4:04 pm

Banjo resonator flange

Post by Pete Czaja »

I have a Musketeer Tenor banjo in need of a resonator flange.
Any information would be greatly appreciated.
Thanks,
Pete
Clay Schaeffer
Posts: 1674
Joined: Fri Jan 06, 2012 12:04 pm

Re: Banjo resonator flange

Post by Clay Schaeffer »

From pictures on the net it looks like it had a pot metal flange that develops deteriorates and develops cracks and falls apart. I have a tenor with a flange that has done the same thing. I am thinking about making a new flange out of a piece of corian plastic as I don't have the metal working capabilities to make a metal replacement. Another possibility would be to drill the banjo pot to take the brackets and hooks, but this would be less "reverse-able"
User avatar
Bob Gramann
Posts: 1101
Joined: Fri Jan 06, 2012 11:08 am
Location: Fredericksburg, VA
Contact:

Re: Banjo resonator flange

Post by Bob Gramann »

Check with Bob Smakula. http://www.smakula.com/ He knows a lot of obscure stuff.
Pete Czaja
Posts: 2
Joined: Thu Apr 19, 2018 4:04 pm

Re: Banjo resonator flange

Post by Pete Czaja »

Thanks Clay and Bob for your input I did get in touch with Bob Smakula, and He was able to identify My Banjo. He said it was made by Kay in the 30's. It is a Musketeer. So, now I know what I'm looking for. Need a resonator flange for a 1930 Kay Tenor Banjo.
Thanks,
Pete Czaja
Glenn Cummings
Posts: 16
Joined: Fri Apr 27, 2018 10:12 am

Re: Banjo resonator flange

Post by Glenn Cummings »

This seller may have or know where you can get one, or a remake.
(Heck this might even be the style you need).
.
Good luck keeping the old stuff alive.


https://www.ebay.com/itm/Bacon-and-Day- ... 1135858785
Post Reply

Return to “Other Stringed Instruments”