Page 1 of 1

Strat neck by Warmoth

PostPosted: Sat Jan 07, 2017 11:42 am
by Charlie Schultz
Donated by Gordon Bellerose (thanks Gordon!).

This is a Strat neck made by Warmoth. It is a maple neck with a rosewood fret board, and dots inlaid. It also has a two way truss rod. Like all Warmoth stuff, it is very nice.
Shipping must be paid by winner (Gordon lives in Canada).

Estimated value = $150, we'll start the auction at $75.

strat_neck1.jpg

strat_neck2.jpg

Re: Strat neck by Warmoth

PostPosted: Sat Apr 15, 2017 7:22 pm
by Bob Francis
Okay I'll go first.
$80

Re: Strat neck by Warmoth

PostPosted: Wed Apr 19, 2017 11:16 am
by Gordon Bellerose
I'm bumping this up.

Re: Strat neck by Warmoth

PostPosted: Thu Apr 20, 2017 7:56 pm
by Bob Francis
Gordon Bellerose wrote:I'm bumping this up.

Good I was going to up my own ante....$100

Re: Strat neck by Warmoth

PostPosted: Fri Apr 21, 2017 7:01 am
by Charlie Schultz
Reminder, this auction ends Sunday at 9 PM US CDT.

Re: Strat neck by Warmoth

PostPosted: Fri Apr 21, 2017 10:28 am
by Gordon Bellerose
Gordon Bellerose wrote:I'm bumping this up.

I only meant to bump the thread up to the top.
I was not bumping the price. As far as I know, your initial bid still stands.

I can say that this neck is still $157.00 American dollars on the Warmoth site.
It is not ultra thin, so there is room to thin it down a bit should you choose to do so, but it isn't a baseball bat either.
It has a two way truss rod, with headstock access.
I would have to look again, but I think the tuner holes are drilled with a two step bit.
It is very well built, like most things at Warmoth.

Re: Strat neck by Warmoth

PostPosted: Mon Apr 24, 2017 11:50 am
by Charlie Schultz
Ok, looks like Bob Francis got a great deal. Bob, please PayPal the forum the $80 and then work out shipping (via PM) with Gordon.

Re: Strat neck by Warmoth

PostPosted: Mon Apr 24, 2017 1:43 pm
by Bob Francis
Charlie Schultz wrote:Ok, looks like Bob Francis got a great deal. Bob, please PayPal the forum the $80 and then work out shipping (via PM) with Gordon.



Woo Hoo!
Thanks fellows will get it in tonight.