StewMac tools

Tele bridge recommendations?

Please put your pickup/wiring discussions in the Electronics section; and put discussions about repair issues, including "disappearing" errors in new instruments, in the Repairs section.

Tele bridge recommendations?

Postby Steve Sawyer » Sun Mar 26, 2017 10:54 pm

Still making progress as you can see from the pics below. I'm dry-fitting everything to make sure that I resolve any fit issues. This revealed that the control cavity was mis-routed a scrunch (a hair too narrow for the pots). Went back and corrected the template (which is where the issue was) and cleaned that up. Also, the bridge pickup was off-center for some reason, so I cleaned that up as well. Had to do a little trimming where the pick guard fits around the control cover, but everything is looking good now.

As I was working on this, I became a little concerned about my choice of bridge. It's a cheap vintage-style "ashtray" bridge from GFS, and I noticed that the edges of the holes where the strings pass through the bridge and through the guitar body had a nasty burr around them. I figured the treble strings in particular wouldn't last long if I tried to bring them into pitch riding against that burr. I used the ol' Dremel to grind off the burr and polish the edges, but I really have no great burning desire to stay "vintage". When I started this project I was working with a friend who was (jokingly) our "subject-matter expert" having built a fretless banjo at one point, and he was really hot on going very vintage.

I was looking at a Gotoh "modern" bridge that isn't too terribly expensive, but thought I'd ask what others have used for their Telecaster-clone builds.

Thanks.

Tele_Dry_Fitting.JPG


Tele Tuners 1s.jpg


Tele Tuners 2s.jpg
==Steve==
User avatar
Steve Sawyer
 
Posts: 373
Joined: Wed Jan 02, 2013 2:20 pm
Location: Detroit, Michigan

Re: Tele bridge recommendations?

Postby Peter Wilcox » Mon Mar 27, 2017 1:23 am

I just use cheap Chinese ones through Amazon like this one: https://smile.amazon.com/gp/product/B00 ... UTF8&psc=1 for about $7.

I've made 4 Tele copies - not planning on any more - and these bridges have been pretty well made and have had no problems.
Maybe I can't fix it, but I can fix it so no one can fix it
User avatar
Peter Wilcox
 
Posts: 871
Joined: Sun Jan 08, 2012 1:31 am
Location: Northeastern California

Re: Tele bridge recommendations?

Postby Mark Swanson » Mon Mar 27, 2017 10:43 am

I like the modern tele bridges. They work great and offer everything I want in a bridge, no hassles. I am not stuck on the vintage thing, why use inferior designs?
    Mark Swanson, guitarist, MIMForum Staff
User avatar
Mark Swanson
 
Posts: 1908
Joined: Thu Jan 05, 2012 11:11 am
Location: Grand Rapids, Michigan USA

Re: Tele bridge recommendations?

Postby Brian Evans » Mon Mar 27, 2017 11:22 am

I just used a Gotoh "modern" bridge the same as you linked to, and liked it a lot. Very happy with it. I got it from here: https://www.woodtoworks.com/Gotoh-Bridg ... _4833.html

And note that the price is cheaper than Stewmac and in $cdn, so around a 30% discount to US bucks these days. Might pay for shipping. Plus you might find something else you want - I used the Bill Lawrence tele pickups in my project.
Brian Evans
 
Posts: 516
Joined: Sat Aug 30, 2014 8:26 am
Location: Tatamagouche, Nova Scotia

Re: Tele bridge recommendations?

Postby Barry Daniels » Mon Mar 27, 2017 11:41 am

I recently used this one. It is not super thick metal, but I like the cut-away side clearance. Also the saddles are semi-compensated.

https://www.amazon.com/gp/product/B00T4ZR55U/ref=oh_aui_detailpage_o08_s00?ie=UTF8&psc=1
MIMF Staff
Barry Daniels
 
Posts: 1722
Joined: Thu Jan 05, 2012 10:58 am
Location: Houston, Texas

Re: Tele bridge recommendations?

Postby Steve Sawyer » Mon Mar 27, 2017 12:49 pm

Thanks for the recommendations!

Mark Swanson wrote:I like the modern tele bridges. They work great and offer everything I want in a bridge, no hassles. I am not stuck on the vintage thing, why use inferior designs?


Yeah, Mark - I've seen similar comments wrt the original "ashtray" design. If I was into building "aged" guitars, it would be a different story, but I'm after something that looks good and plays as good as I can make it.

It'll be awhile before I'll be assembling this axe, so feel free to offer other recommendations if anyone has one...

Thanks again!
==Steve==
User avatar
Steve Sawyer
 
Posts: 373
Joined: Wed Jan 02, 2013 2:20 pm
Location: Detroit, Michigan

Re: Tele bridge recommendations?

Postby David King » Mon Mar 27, 2017 12:50 pm

My Tele guru friend always says that the thinner bridges sound better to him. Worth an experiment some day.
David King
 
Posts: 2302
Joined: Sat Jan 07, 2012 10:01 pm
Location: Portland, OR

Re: Tele bridge recommendations?

Postby Barry Daniels » Mon Mar 27, 2017 2:07 pm

A lot of the Tele guru's also say a traditional three-saddle bridge sounds better than the bridge with six fully adjustable saddles. That is why I went with the one in my previous post. I am not a guru but it sounds pretty traditional to me.
MIMF Staff
Barry Daniels
 
Posts: 1722
Joined: Thu Jan 05, 2012 10:58 am
Location: Houston, Texas

Re: Tele bridge recommendations?

Postby Steve Sawyer » Mon Mar 27, 2017 3:15 pm

Barry Daniels wrote:A lot of the Tele guru's also say a traditional three-saddle bridge sounds better than the bridge with six fully adjustable saddles. That is why I went with the one in my previous post. I am not a guru but it sounds pretty traditional to me.

This is my first build, so I was kinda shying away from the three-saddle arrangement. I don't want to run into some kind of intonation problem, and be unable to determine if it's an issue with the compensation of the bridge saddles, or something else I've done wrong.

I'd be curious to know how the three-saddle setup affects the sound (just curious ignorance here - not questioning the claim). That bridge that you linked to looks like a good 'un.
==Steve==
User avatar
Steve Sawyer
 
Posts: 373
Joined: Wed Jan 02, 2013 2:20 pm
Location: Detroit, Michigan

Re: Tele bridge recommendations?

Postby Edgar Jessop » Mon Mar 27, 2017 10:53 pm

Attachments
DSCN2530.JPG
Edgar Jessop
 
Posts: 28
Joined: Sat Jun 02, 2012 7:23 pm

Re: Tele bridge recommendations?

Postby Barry Daniels » Tue Mar 28, 2017 11:38 am

I was able to get the strings compensated just fine. The round saddles have bevels to place the string break point near the ideal locations.

As far as the tone claim, that is not mine but some comments I found at the Tele forum (TDPRI). And I have no real evidence of the benefit either way. I'm sure that you could find recommendations against the 3-saddle bridge. In my case, I was going for a more traditional look.
MIMF Staff
Barry Daniels
 
Posts: 1722
Joined: Thu Jan 05, 2012 10:58 am
Location: Houston, Texas

Re: Tele bridge recommendations?

Postby Freeman Keller » Tue Mar 28, 2017 8:06 pm

On my latest barncaster the owner-to-be spec'd Glendale components

http://www.glendaleguitars.com/

They are pretty expensive (he paid for them and had them shipped to me). They have a funky worn look without being "reliced" - seem fine and the triple saddles intonated without any problem (I've only used individual saddles before). He also wanted a P90 in the neck and spec'd Budz pups - expensive but I really like the warmth of the neck.

Image

One thing to consider is reversing the cavity cover so the volume control is in front and switch at the back (put the switch in the normal way so neck is forward) - a lot of players like the access to the volume pot. Also I used a four way switch on this one, give the option of either pickup alone and both in series and parallel
Freeman Keller
 
Posts: 224
Joined: Mon Feb 27, 2012 11:34 am

Re: Tele bridge recommendations?

Postby Gordon Bellerose » Sat Apr 01, 2017 12:56 am

I need your help. I can't possibly make all the mistakes myself!
Gordon Bellerose
 
Posts: 926
Joined: Wed May 30, 2012 11:47 pm
Location: Edmonton AB. Canada

Re: Tele bridge recommendations?

Postby Michael Jennings » Sat Apr 01, 2017 6:25 pm

I've always gone with Callaham parts for "Fender" styled builds. Certainly more expensive than the usual suspects but the quality is definitely there.
Michael Jennings
 
Posts: 58
Joined: Sat Jan 07, 2012 6:54 pm

Re: Tele bridge recommendations?

Postby Steve Sawyer » Sun Apr 02, 2017 4:58 pm

Thanks - more ideas to consider!
==Steve==
User avatar
Steve Sawyer
 
Posts: 373
Joined: Wed Jan 02, 2013 2:20 pm
Location: Detroit, Michigan


Return to Solid-Body and Chambered or Semi-Solid Electric Guitars and Bass Guitars

Who is online

Users browsing this forum: Bing [Bot] and 1 guest

Your purchase from these sites helps support the MIMForum, but only if you start at the links below!!!
Amazon music     Amazon books     Amazon tools     Rockler tools     Office Depot    

The MIMF is a member-supported forum, please consider supporting us with a donation, thanks!
 • Book store • Tool store • Links •