what scale for drop A??

Please put your pickup/wiring discussions in the Electronics section; and put discussions about repair issues, including fixing errors in new instruments, in the Repairs section.

what scale for drop A??

Postby Mario Kessels » Tue Apr 24, 2018 6:50 am

Dear friends. I am thinking of building a drop a guitar for a friend who is in a stoner band.
Any ideas about the ideal scale for this? Maybe even fanned?
I build/ repair professionally btw.
thx Mario
Mario Kessels
 
Posts: 64
Joined: Sun Sep 16, 2012 7:03 am
Location: Deurne netherlands

Re: what scale for drop A??

Postby Bob Gramann » Tue Apr 24, 2018 9:07 am

I built a successful baritone tuned from B to B with a 27 inch scale. I think the strings went from .067 to .014”.
User avatar
Bob Gramann
 
Posts: 770
Joined: Fri Jan 06, 2012 11:08 am
Location: Fredericksburg, VA

Re: what scale for drop A??

Postby Alan Carruth » Tue Apr 24, 2018 9:56 am

I've made two bari's for Ken Bonfield, and couple for other folks as well. The first of Ken's had a 27.75" scale. That was too long, and the second one was shorter. He has used both in B-b tuning with 'normal' intervals, but drops the low string several semitones most of the time. Ken's a real gear head, and will discuss stringing and pickups for as long as you like. Check out his web site.
Alan Carruth
 
Posts: 826
Joined: Sun Jan 15, 2012 1:11 pm

Re: what scale for drop A??

Postby David King » Tue Apr 24, 2018 1:14 pm

420 mm? <G>
David King
 
Posts: 2431
Joined: Sat Jan 07, 2012 10:01 pm
Location: Portland, OR

Re: what scale for drop A??

Postby Paul Rhoney » Thu Apr 26, 2018 11:36 am

I'm gonna go a little against the grain here and say that for a stoner band, and I assume we're talking about doom metal here, you actually probably want to just stick with 24-3/4" scale length. I think a huge part of the sound of that music is the Gibson Les Pauls that all those guys seem to play, and they all tune way down, with gigantic string gauges. But the short scale length introduces this sloppiness to it, a sort instability to the tone. You get this always just a certain amount of out-of-tune modulation, which creates that thick density and complex grit. It's perfect because it's imperfect.

For an example, listen to this. These guys are playing cheap LP copies tuned down to drop A#. The 3:55 mark is ridiculous, you can actually hear the fret rattle.
User avatar
Paul Rhoney
 
Posts: 178
Joined: Fri Jan 06, 2012 1:34 pm
Location: Vancouver, WA USA


Return to Flat-Top Acoustic Guitars and Bass Guitars

Who is online

Users browsing this forum: No registered users and 2 guests

Your purchase from these sites helps support the MIMForum, but only if you start at the links below!!!
Amazon music     Amazon books     Amazon tools     Rockler tools     Office Depot    

The MIMF is a member-supported forum, please consider supporting us with a donation, thanks!
 • Book store • Tool store • Links •