radius dish
-
- Posts: 16
- Joined: Fri Nov 03, 2017 5:32 am
radius dish
do i need a radius dish when I'm making a guitar?
-
- Posts: 494
- Joined: Mon Feb 27, 2012 11:34 am
Re: radius dish
It is helpful but not necessary. For my first couple I made some radiused cauls that I used to clamp braces against
You can stick sandpaper to the cauls later to sand the kirfing to the correct angle.
Another trick with a go-bar is to take a stack of buisness cards and fan them out on the bottom plate of the deck - take your curved brace and make the fan fit the brace. Then clamp against the cards
You can stick sandpaper to the cauls later to sand the kirfing to the correct angle.
Another trick with a go-bar is to take a stack of buisness cards and fan them out on the bottom plate of the deck - take your curved brace and make the fan fit the brace. Then clamp against the cards